Skroutz.cy

Artpol Diamond Drill HSS with Cylindrical Shank for Metal 8mm / 0.8x165mm
Drills

Artpol Diamond Drill HSS with Cylindrical Shank for Metal 8mm / 0.8x165mm

Metal drill bit HSS-G extended 8.0x165mm.

  • Drill bit made of high-speed steel 4241 with hardness 62 HRc and point angle 118 degrees.
  • Diameter: 8mm.
  • Total length: 165mm.
  • Working length: 109mm.
  • Straight...

Metal drill bit HSS-G extended 8.0x165mm.

  • Drill bit made of high-speed steel 4241 with hardness 62 HRc and point angle 118 degrees.
  • Diameter: 8mm.
  • Total length: 165mm.
  • Working length: 109mm.
  • Straight grinding without chamfer correction, suitable for manual sharpening.
  • Right-hand spiral type N.
  • Cylindrical shank corresponding to the diameter of the drill...
See full description See full description

Top specs

  • Length 165 mm
  • Drilling Material Metal

  • Drill Bit Shank

    Cylindrical

    It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
  • Diameter 8 mm, 0.8 mm
  • See all
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Metal drill bit HSS-G extended 8.0x165mm.

  • Drill bit made of high-speed steel 4241 with hardness 62 HRc and point angle 118 degrees.
  • Diameter: 8mm.
  • Total length: 165mm.
  • Working length: 109mm.
  • Straight grinding without chamfer correction, suitable for manual sharpening.
  • Right-hand spiral type N.
  • Cylindrical shank corresponding to the diameter of the drill bit.
  • The surface of the drill bit is covered with an oxide layer, which ensures a low friction coefficient and increases drilling performance.
  • Compliant with DIN 1869 II.
  • Recommended coolant use: drilling emulsion, lubricant and coolant oil, ester oil.
  • Intended for laboratory applications in alloy and carbon steel with strength up to 900N/mm2, gray and ductile cast iron, sintered iron, non-ferrous metals, and hardened plastics.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Drill Material
HSS

Drill Material

HSS
It is made of steel, which is suitable for high-speed work. It is intended for drilling holes in common steel, iron, and non-ferrous metals.
Drill Bit Coating Material
Diamond
Suitable for
Metal
Drill Top
Cylindrical

Drill Top

Cylindrical
It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
Set with Tips
No
Pieces
1 pcs
Length
165 mm
Diameter
8 mm, 0.8 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Metal drill bit HSS-G extended 8.0x165mm.

  • Drill bit made of high-speed steel 4241 with hardness 62 HRc and point angle 118 degrees.
  • Diameter: 8mm.
  • Total length: 165mm.
  • Working length: 109mm.
  • Straight grinding without chamfer correction, suitable for manual sharpening.
  • Right-hand spiral type N.
  • Cylindrical shank corresponding to the diameter of the drill bit.
  • The surface of the drill bit is covered with an oxide layer, which ensures a low friction coefficient and increases drilling performance.
  • Compliant with DIN 1869 II.
  • Recommended coolant use: drilling emulsion, lubricant and coolant oil, ester oil.
  • Intended for laboratory applications in alloy and carbon steel with strength up to 900N/mm2, gray and ductile cast iron, sintered iron, non-ferrous metals, and hardened plastics.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Drill Material
HSS

Drill Material

HSS
It is made of steel, which is suitable for high-speed work. It is intended for drilling holes in common steel, iron, and non-ferrous metals.
Drill Bit Coating Material
Diamond
Suitable for
Metal
Drill Top
Cylindrical

Drill Top

Cylindrical
It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
Set with Tips
No
Pieces
1 pcs
Length
165 mm
Diameter
8 mm, 0.8 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

6,62 €
4,50 €   shipping cost