The window stickers made of sandblasted film are ideal for ensuring privacy, as from any angle you look, you will only see shadows. The film is applied to the glass, allows natural light to pass through, and reduces solar radiation.

Technical specifications of sandblasted film sticker:

• Sticker
• Transparent
• Material - PVC
• Roll width - 105 cm

Application instructions for sandblasting film:

The films can be applied to mirrors or plexiglass: windows, glass doors, shower cabins. Installation can be done in areas with a minimum temperature of 15 degrees Celsius.

Steps for applying film with water (required materials: window cleaning solution, water, liquid dish detergent/shampoo, sprayer, squeegee, cutter, cloth):

• Clean and degrease the glass.
• Prepare the application solution by mixing 1 liter of water with 1 teaspoon of liquid detergent or shampoo.
• Cut the piece of film you need for the window, leaving a margin of 2-3 cm.
• Remove the protective sheet from the back of the film, then spray the solution on the back of the film as you remove the protective sheet. This way, the film will not attract dust.
• Spray the solution on the window as well, then gently apply the film and make the necessary adjustments. Start clearing from the center towards the edges to remove water and air bubbles. Using a well-sharpened cutter, cut the excess material next to the threshold.

After application, white spots may appear under the film. These represent a reaction of the glue with the water and will disappear after drying. The glue will dry completely in about 1 week.