Water-soluble acrylic primer for interior use, suitable for plasterboards as well as surfaces made of plaster, concrete, putty, etc. It equalizes the absorbency between the plasterboard and the grouting material, ensuring a flawless result after the final paint.

• SHADES: Available in white
• PACKAGING: 750ml, 3Lt, 10Lt

SURFACE PREPARATION:

• To ensure proper adhesion of the product, the surface should be cleaned from dust, grease, oils, peeling old paints, rust, residual mold, or moisture.
• Apply the product with a brush or roller and let it dry for 1 - 2 hours.
• Apply the final paint.
• The product acquires all its mechanical resistance after 20 - 30 days.

APPLICATION CONDITIONS: Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is more than 80%. Adverse conditions during application can alter the final properties of the product.

APPLICATION TOOLS: Brush, Roller. During work, keep the tools “wet” inside the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can be removed only with strong detergents. Do not empty the washing liquids into the groundwater.

CAUTION: Wear protective gloves / protective clothing / eye protection / face protection. In case of contact with eyes, rinse carefully with plenty of water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.