Special waterproof material, colorless, specially designed for decorating and protecting all types of stone and related building materials, such as decorative bricks, ceramics, Karystos tiles, limestone, etc. It penetrates deeply into the pores and provides a glossy surface that enhances the unique shades of each stone. It is resistant to impacts and wear from walking, does not yellow, does not peel and is easy to use.

Surface Preparation:

• To ensure proper adhesion of the product, the surface must be cleaned of dust, grease, oils, rust, mold residues or moisture, etc.
• Prime the surface with the corresponding recommended primer for the product (the product itself diluted with 50% Nitro thinner).
• Shake the product well and apply 1-2 coats.
• The product acquires all its mechanical strength after 20 - 30 days.

Application Conditions:

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the product.

Application Tools:

• Brush
• Roller

During work, keep the tools "wet" in the container with the product. After use, immediately clean the tools with Nitro thinner. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids in the water table.