Skroutz.cy

Maestro Inverter MAG / MIG / MMA / TIG Welding Machine with Maximum Welding Current of 200A and 60% Duty Cycle

100 € coupon for your next purchase!

Welding Machines

Maestro Inverter MAG / MIG / MMA / TIG Welding Machine with Maximum Welding Current of 200A and 60% Duty Cycle

The Maestro welding machine supports MAG, MIG, MMA and TIG welding, with a maximum current of 200 A and a duty cycle of up to 60%. Pulse mode helps improve stability and reduce heat distortion when...

The Maestro welding machine supports MAG, MIG, MMA and TIG welding, with a maximum current of 200 A and a duty cycle of up to 60%. Pulse mode helps improve stability and reduce heat distortion when welding thin sheets, while Hot Start and Arc Force functions make it easier to start and control the weld.

The 2T and 4T functions allow you to choose the...

See full description See full description

Top specs

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    220

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    8.6

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
695 77 €
You earn a 100 € coupon
for your next purchase

Deals & Benefits

Κέρδισε 100€ κουπόνι!

Κάνε μία παραγγελία άνω των 600€ έως 18/11 και κέρδισε κουπόνι 100€ για την επόμενη παραγγελία σου άνω των 400€.

Μην ξεχνάς ότι μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 150€ για να κάνεις τις Black Friday αγορές σου ακόμα πιο συμφέρουσες!

  • H προωθητική ενέργεια ισχύει για μία (1) παραγγελία συνολικής αξίας προϊόντων άνω των 600€ μέσω της Υπηρεσίας “Αγορά μέσω Skroutz” μεταξύ 9/11 00:01 έως και 18/11 23:59 με διεύθυνση αποστολής στην Κύπρο.
  • Το κουπόνι 100€ αποδίδεται αμέσως μετά την παράδοση της παραγγελίας συμμετοχής στην προωθητική ενέργεια, θα έχει διάρκεια 30 ημέρες και θα είναι εξαργυρώσιμο σε μία παραγγελία άνω των 400€.

Terms & conditions apply
Delivery Thursday, 19 November
125,00 € shipping cost
Delivery Thu, 26 Nov - Mon, 30 Nov
61,00 € shipping cost
Do you want it with 5,00 € shipping discount?
Sent from Greece
From Getters 4.5 (117)
4.5 (117 reviews)
Greece
10 pieces
See Tools on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The Maestro welding machine supports MAG, MIG, MMA and TIG welding, with a maximum current of 200 A and a duty cycle of up to 60%. Pulse mode helps improve stability and reduce heat distortion when welding thin sheets, while Hot Start and Arc Force functions make it easier to start and control the weld.

The 2T and 4T functions allow you to choose the operating mode to suit the task.

  • Welding processes: MAG, MIG, MMA, TIG
  • Technology: Inverter
  • Maximum welding current: 200 A
  • Duty cycle: 60 %
  • Power supply: 220 V
  • Power: 8.6 kVA
  • Weight: 22 kg
  • Functions: Hot Start, Arc Force, 2T, 4T, pulse

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
8.6 kVA

Power: 8.6


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
22000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Maestro welding machine supports MAG, MIG, MMA and TIG welding, with a maximum current of 200 A and a duty cycle of up to 60%. Pulse mode helps improve stability and reduce heat distortion when welding thin sheets, while Hot Start and Arc Force functions make it easier to start and control the weld.

The 2T and 4T functions allow you to choose the operating mode to suit the task.

  • Welding processes: MAG, MIG, MMA, TIG
  • Technology: Inverter
  • Maximum welding current: 200 A
  • Duty cycle: 60 %
  • Power supply: 220 V
  • Power: 8.6 kVA
  • Weight: 22 kg
  • Functions: Hot Start, Arc Force, 2T, 4T, pulse

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
8.6 kVA

Power: 8.6


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
22000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

695,77 €
125,00 € 130,00 €   shipping cost