Skroutz.cy

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg
Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg

Mechanism for the automation of sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-8

Maximum leaf weight: 600kg

Motor power: 280Watt

Type of mechanism: Permanent...

Mechanism for the automation of sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-8

Maximum leaf weight: 600kg

Motor power: 280Watt

Type of mechanism: Permanent lubrication with grease, Non-reversible

Openings per hour: for a door indicative length of 5 m, at 20°C: up to 25

Motor operating voltage: 230VAC (single-phase)

What the...

See full description See full description
339 00 €
339 Coins 339 Coins
Delivery Fri, 10 Jul - Tue, 14 Jul
21,00 € shipping cost
Delivery Mon, 20 Jul - Wed, 22 Jul
17,00 € shipping cost
Do you want it with 16,00 € shipping?
Sent from Greece
From NextSystems
Greece
20+ pieces
See Garage Door Mechanisms on the page of NextSystems
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Mechanism for the automation of sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-8

Maximum leaf weight: 600kg

Motor power: 280Watt

Type of mechanism: Permanent lubrication with grease, Non-reversible

Openings per hour: for a door indicative length of 5 m, at 20°C: up to 25

Motor operating voltage: 230VAC (single-phase)

What the initial set includes:

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metallic support base
  • 4 M8 galvanized anchors
  • 8 Ø8 galvanized washers
  • 8 M8 nuts
  • 2 metal plates (stop brackets) activating the limit switches
  • 4 M6 screws for the stop brackets
  • 4 Ø8mm grover washers for the stop brackets
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 electronic control panel with integrated receiver
  • 8 remote controls with 4 buttons
  • 1 set of safety photocells (wired: transmitter & receiver)
  • 1 operation notification beacon

In a separate package measuring 1210mm x 60mm x 30mm, 4 meters of metal rack module 4 (toothed rule) with spacers and screws are also included.

Technical Specifications:

  • Power supply voltage: 230VAC
  • Motor power consumption: 280Watt
  • Supply current: 1.3A
  • Motor speed: 1400rpm
  • Capacitance: 12.5 μF
  • Maximum door weight: 600kg
  • Type of mechanism: Electromechanical permanent lubrication with grease, non-reversible
  • Internal gears: Metal
  • Maximum leaf speed: 13m/min
  • Thermal protection of motor winding: 120°C
  • Gear type: Z17 / m4 (17 teeth / module 4)
  • Operating temperature range: -20°C to +55°C
  • Degree of protection against dust and moisture: IP-44
  • Sound pressure level: <56db
  • Motor weight: 10Kg
  • Motor dimensions: 237mm x 213 mm x 270 mm
  • Motor box dimensions: 270mm x 255mm x 320mm
  • Motor cover color: Black
  • Packaging: Cardboard box
  • CE Compliance: YES

The DKC600 sliding garage door motor is suitable for most residential sliding gates on the market.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
8 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

Mechanism for the automation of sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-8

Maximum leaf weight: 600kg

Motor power: 280Watt

Type of mechanism: Permanent lubrication with grease, Non-reversible

Openings per hour: for a door indicative length of 5 m, at 20°C: up to 25

Motor operating voltage: 230VAC (single-phase)

What the initial set includes:

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metallic support base
  • 4 M8 galvanized anchors
  • 8 Ø8 galvanized washers
  • 8 M8 nuts
  • 2 metal plates (stop brackets) activating the limit switches
  • 4 M6 screws for the stop brackets
  • 4 Ø8mm grover washers for the stop brackets
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 electronic control panel with integrated receiver
  • 8 remote controls with 4 buttons
  • 1 set of safety photocells (wired: transmitter & receiver)
  • 1 operation notification beacon

In a separate package measuring 1210mm x 60mm x 30mm, 4 meters of metal rack module 4 (toothed rule) with spacers and screws are also included.

Technical Specifications:

  • Power supply voltage: 230VAC
  • Motor power consumption: 280Watt
  • Supply current: 1.3A
  • Motor speed: 1400rpm
  • Capacitance: 12.5 μF
  • Maximum door weight: 600kg
  • Type of mechanism: Electromechanical permanent lubrication with grease, non-reversible
  • Internal gears: Metal
  • Maximum leaf speed: 13m/min
  • Thermal protection of motor winding: 120°C
  • Gear type: Z17 / m4 (17 teeth / module 4)
  • Operating temperature range: -20°C to +55°C
  • Degree of protection against dust and moisture: IP-44
  • Sound pressure level: <56db
  • Motor weight: 10Kg
  • Motor dimensions: 237mm x 213 mm x 270 mm
  • Motor box dimensions: 270mm x 255mm x 320mm
  • Motor cover color: Black
  • Packaging: Cardboard box
  • CE Compliance: YES

The DKC600 sliding garage door motor is suitable for most residential sliding gates on the market.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
8 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

339,00 €
21,00 € 26,00 €   shipping cost