Skroutz.cy

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg
Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications:

  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Type of mechanism: Permanent lubrication with...

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications:

  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Type of mechanism: Permanent lubrication with grease, Non-reversible
  • Openings and closings per hour: up to 25 for a door of indicative length 5m, at 20°C
  • Operating voltage of the motor: 230VAC (single phase)

...

See full description See full description
319 00 €
319 Coins 319 Coins
Delivery Fri, 10 Jul - Tue, 14 Jul
21,00 € shipping cost
Delivery Mon, 20 Jul - Wed, 22 Jul
17,00 € shipping cost
Do you want it with 16,00 € shipping?
Sent from Greece
From NextSystems
Greece
20+ pieces
See Garage Door Mechanisms on the page of NextSystems
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications:

  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Type of mechanism: Permanent lubrication with grease, Non-reversible
  • Openings and closings per hour: up to 25 for a door of indicative length 5m, at 20°C
  • Operating voltage of the motor: 230VAC (single phase)

Contents of the initial set:

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metal support bracket
  • 4 M8 galvanized anchors
  • 8 Ø8 galvanized washers
  • 8 M8 nuts
  • 2 metal activation plates for the limit switches
  • 4 M6 screws for the stop plates
  • 4 Ø8mm grover washers for the stop plates
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 control panel with built-in receiver
  • 6 four-button remote controls with rolling code
  • 1 set of safety photocells (wired: transmitter & receiver)
  • 1 operation notification light

Dimensions of the mechanism:

  • Motor dimensions: 237mm x 213 mm x 270 mm
  • Motor box dimensions: 270mm x 255mm x 320mm

The DKC600 motor is suitable for most residential sliding gates on the market, with a maximum door leaf weight of 600kg.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
6 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications:

  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Type of mechanism: Permanent lubrication with grease, Non-reversible
  • Openings and closings per hour: up to 25 for a door of indicative length 5m, at 20°C
  • Operating voltage of the motor: 230VAC (single phase)

Contents of the initial set:

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metal support bracket
  • 4 M8 galvanized anchors
  • 8 Ø8 galvanized washers
  • 8 M8 nuts
  • 2 metal activation plates for the limit switches
  • 4 M6 screws for the stop plates
  • 4 Ø8mm grover washers for the stop plates
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 control panel with built-in receiver
  • 6 four-button remote controls with rolling code
  • 1 set of safety photocells (wired: transmitter & receiver)
  • 1 operation notification light

Dimensions of the mechanism:

  • Motor dimensions: 237mm x 213 mm x 270 mm
  • Motor box dimensions: 270mm x 255mm x 320mm

The DKC600 motor is suitable for most residential sliding gates on the market, with a maximum door leaf weight of 600kg.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
6 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

319,00 €
21,00 € 26,00 €   shipping cost