Surface Preparation

• To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, flaking old paints, rust, mold residues, or moisture.
• For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).
• Apply the product in 2 coats (after thoroughly mixing it) which should be spaced 1 - 2 hours apart.

Dilution

• First coat: 15% water.
• Second coat: 5-10% water.

Application Conditions

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%.
• Adverse conditions during application can affect the final properties of the paint.

Application Tools

• Brush
• Roller
• Paint spray gun

During work, keep the tools "wet" in the container or the receptacle with the product. Wring the tools well back into the box and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not empty the washing liquids into the groundwater.

Warning: Wear protective gloves/protective clothing/eye/face personal protective equipment. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.