Skroutz.cy

Franklin Electric Single-phase Submersible Pump Motor 3hp 115150004
Submersible Water Pumps

Franklin Electric Single-phase Submersible Pump Motor 3hp 115150004

Submersible electric motors suitable for 4" wells with a maximum depth of 250m, featuring a NEMA standard flange. They operate in combination with deep well pumps of the same coupling dimensions and...

Submersible electric motors suitable for 4" wells with a maximum depth of 250m, featuring a NEMA standard flange. They operate in combination with deep well pumps of the same coupling dimensions and are primarily used in vertical installations.

TECHNICAL SPECIFICATIONS

  • Nominal voltage: SINGLE PHASE 210-220-230V /50Hz
  • Power range: 0.37 kW4.0 kW
  • Voltage...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Submersible electric motors suitable for 4" wells with a maximum depth of 250m, featuring a NEMA standard flange. They operate in combination with deep well pumps of the same coupling dimensions and are primarily used in vertical installations.

TECHNICAL SPECIFICATIONS

  • Nominal voltage: SINGLE PHASE 210-220-230V /50Hz
  • Power range: 0.37 kW÷4.0 kW
  • Voltage tolerance: ± 10%
  • Cable length: 0.37-2.2kW=1.5m / 3.0-4.0kW=2.5m / 7.5kW=3.5m
  • Cable dimensions: 4x1.5 mm²
  • Ambient temperature: 30 °C
  • Insulation class: F
  • Protection rating: IP68
  • Number of starts/hour: 30
  • Single-phase motors do not include a capacitor

TYPE

  • NBS4 300

ELECTRONICS

  • VOLTAGE: 1x220V
  • POWER: 3 HP
  • CURRENT: 2.2 kW
  • CAPACITOR: 14.8 µF
  • WEIGHT: 76 KG

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
3 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2250 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Submersible electric motors suitable for 4" wells with a maximum depth of 250m, featuring a NEMA standard flange. They operate in combination with deep well pumps of the same coupling dimensions and are primarily used in vertical installations.

TECHNICAL SPECIFICATIONS

  • Nominal voltage: SINGLE PHASE 210-220-230V /50Hz
  • Power range: 0.37 kW÷4.0 kW
  • Voltage tolerance: ± 10%
  • Cable length: 0.37-2.2kW=1.5m / 3.0-4.0kW=2.5m / 7.5kW=3.5m
  • Cable dimensions: 4x1.5 mm²
  • Ambient temperature: 30 °C
  • Insulation class: F
  • Protection rating: IP68
  • Number of starts/hour: 30
  • Single-phase motors do not include a capacitor

TYPE

  • NBS4 300

ELECTRONICS

  • VOLTAGE: 1x220V
  • POWER: 3 HP
  • CURRENT: 2.2 kW
  • CAPACITOR: 14.8 µF
  • WEIGHT: 76 KG

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
3 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2250 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.