Skroutz.cy

Pentax Electric Surface Water Pump 2.5hp
Surface Water Pumps

Pentax Electric Surface Water Pump 2.5hp Code: 113130057

The Pentax 113130057 electric surface pump has two impellers and is designed for building pressure-boosting systems in residential and industrial installations. Its flow rate reaches up to 12 m³/h,...

The Pentax 113130057 electric surface pump has two impellers and is designed for building pressure-boosting systems in residential and industrial installations. Its flow rate reaches up to 12 m³/h, while the head ranges from 25.8 to 45.6 m at the specified flow rates.

The pump body and motor bracket are made of cast iron, while the impeller is made of Noryl....

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
369 00 €
Delivery Friday, 06 November
9,00 € shipping cost
Delivery Fri, 13 Nov - Tue, 17 Nov
8,00 € shipping cost
Do you want it with 5,00 € shipping discount?
Sent from Greece
From Kouretas 4.9 (22)
4.9 (22 reviews)
Greece
See Water Pumps on the page of Kouretas
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The Pentax 113130057 electric surface pump has two impellers and is designed for building pressure-boosting systems in residential and industrial installations. Its flow rate reaches up to 12 m³/h, while the head ranges from 25.8 to 45.6 m at the specified flow rates.

The pump body and motor bracket are made of cast iron, while the impeller is made of Noryl®. It features a ceramic-graphite mechanical seal, an AISI 303 stainless steel shaft, and a two-pole motor with thermal protection.

  • Power supply: Electric, 1 × 230 V
  • Power: 2.5 hp
  • Current: 10.4 A
  • Maximum operating pressure: 8 bar
  • Liquid temperature: 0–50 °C
  • Ports: 1½" × 1¼"
  • Insulation class: F
  • Protection rating: IPX4
  • Dimensions: 405 × 225 × 295 mm
  • Weight: 22.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
113130057

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Horsepower
2.5 hp
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Pentax 113130057 electric surface pump has two impellers and is designed for building pressure-boosting systems in residential and industrial installations. Its flow rate reaches up to 12 m³/h, while the head ranges from 25.8 to 45.6 m at the specified flow rates.

The pump body and motor bracket are made of cast iron, while the impeller is made of Noryl®. It features a ceramic-graphite mechanical seal, an AISI 303 stainless steel shaft, and a two-pole motor with thermal protection.

  • Power supply: Electric, 1 × 230 V
  • Power: 2.5 hp
  • Current: 10.4 A
  • Maximum operating pressure: 8 bar
  • Liquid temperature: 0–50 °C
  • Ports: 1½" × 1¼"
  • Insulation class: F
  • Protection rating: IPX4
  • Dimensions: 405 × 225 × 295 mm
  • Weight: 22.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
113130057

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Horsepower
2.5 hp
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

369,00 €
9,00 € 14,00 €   shipping cost