Sign up in one tap with Google, Apple or Facebook
The Fronius Smart Meter TS 100A-1 energy meter records the consumption and flow of electrical energy in both directions between a single-phase photovoltaic system and the public grid. When used with a compatible Fronius inverter or Fronius Datamanager 2.0, it transmits measurement data via Modbus RTU / RS485 to monitor generation, consumption, and the energy imported from or exported to the grid.
It supports direct measurement up to 100 A, features a touchscreen display, and is installed on a 35 mm DIN rail, occupying 2 modules.
- Type: Energy meter
- Display type: Digital
- Number of phases: Single-phase (1PN)
- Maximum current: 100 A
- Nominal voltage: 230 V
- Operating voltage range: 161–276 V
- Nominal current: 5 A
- Starting current: 40 mA
- Frequency: 50–60 Hz
- Frequency range: 45–65 Hz
- Accuracy class: Class 1
- Active energy accuracy: Class 1 according to EN 62053-21 / Class B according to EN 50470-3
- Reactive energy accuracy: Class 2 according to EN 62053-23
- Communication: RS485
- Protocol: Modbus RTU
- Communication speed: 9600 / 19200 bit/s
- Maximum measurement conductor cross-section: 25 mm²
- Power consumption: ≤1 W
- Operating temperature: -25 °C to +65 °C
- Enclosure protection rating: IP51
- Terminal protection rating: IP20
- Mounting: On a 35 mm DIN rail
- Width: 35.8 mm
- Height: 91.5 mm
- Depth: 63 mm
- Weight: 160 g
- Type
- Energy Analyzer
- Display Type
- Digital
- Number of Phases
- Single-phase
- Maximum Current
- 100 A
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.