Skroutz.cy

Einhell Ge-dp 18/25 Ll Li - Solo Pump Waste Water / Sewage 18V 0.2hp 4181590
Submersible Water Pumps

Einhell Ge-dp 18/25 Ll Li - Solo Pump Waste Water / Sewage 18V 0.2hp 4181590

The Einhell GE-DP 18/25 LL Li sewage and dirty water pump is a complete solution for removing or preventing flooding. It can be used for draining ponds and swimming pools, whether partially submerged...

The Einhell GE-DP 18/25 LL Li sewage and dirty water pump is a complete solution for removing or preventing flooding. It can be used for draining ponds and swimming pools, whether partially submerged or fully submerged.

It features a double-sided handle for easy transport, as well as an adapter for general-purpose hoses. This pump can remove water down to...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    18V

    It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
129 40 €
Delivery Thu, 16 Jul - Mon, 20 Jul
28,00 € shipping cost
Do you want it with 23,00 € shipping?
Sent from Greece
From Toolflix 5.0 (54)
5.0 (54 reviews)
Greece
1 piece
See Water Pumps on the page of Toolflix
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The Einhell GE-DP 18/25 LL Li sewage and dirty water pump is a complete solution for removing or preventing flooding. It can be used for draining ponds and swimming pools, whether partially submerged or fully submerged.

It features a double-sided handle for easy transport, as well as an adapter for general-purpose hoses. This pump can remove water down to 1mm, with a speed of 7000l/h.

It is part of Einhell's Power X-Change family, which allows the use of one battery with more than 250 tools for home and garden.

The device has two operating settings: ECO and BOOST. The ECO mode provides longer runtime with less battery consumption, while the BOOST mode delivers maximum performance.

Thanks to the 5-meter connection cable, it can be submerged up to 4 meters deep in sewage and can pump water and dirt to a maximum height of 5 meters.

The 42mm pressure connection is attached to the top of the pump for easy access. The sewage pump also comes with a general-purpose adapter for flexible hoses 25/32mm.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Voltage
18V

Voltage

18V

It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 
Horsepower
0.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
150 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
5 m

Maximum Head Height: 5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
4 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

4 users have this product and can help you

Ask for the product

Description & Specifications

The Einhell GE-DP 18/25 LL Li sewage and dirty water pump is a complete solution for removing or preventing flooding. It can be used for draining ponds and swimming pools, whether partially submerged or fully submerged.

It features a double-sided handle for easy transport, as well as an adapter for general-purpose hoses. This pump can remove water down to 1mm, with a speed of 7000l/h.

It is part of Einhell's Power X-Change family, which allows the use of one battery with more than 250 tools for home and garden.

The device has two operating settings: ECO and BOOST. The ECO mode provides longer runtime with less battery consumption, while the BOOST mode delivers maximum performance.

Thanks to the 5-meter connection cable, it can be submerged up to 4 meters deep in sewage and can pump water and dirt to a maximum height of 5 meters.

The 42mm pressure connection is attached to the top of the pump for easy access. The sewage pump also comes with a general-purpose adapter for flexible hoses 25/32mm.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Voltage
18V

Voltage

18V

It is usually ideal for portable pumps or applications where the power supply is limited, such as in cars, boats, or renewable energy systems (e.g., solar energy). 
Horsepower
0.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
150 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
5 m

Maximum Head Height: 5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
4 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

129,40 €
28,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more