This incubation machine features a pulse thermostat for total accuracy in temperature and humidity. It is equipped with a steam system that automatically softens the shells of the eggs, ensuring high hatch success rates without the need for manual spraying.

• Rotation System: Rack with rollers for automatic turning of the eggs.

• Air Circulation: 2 fans for uniform distribution of heat and humidity.

• Dual Power: Operates on 220V AC and 12V DC (includes cable for battery in case of power outage).

• Programs: 5 pre-installed programs (chicken, duck, goose, quail, pheasant) and manual adjustment.

• Insulation: External casing made of styrofoam (never removable).

1. Which program should I choose? You can select the manual (SET) starting at 37.8°C and 60-70% humidity, or an automatic program by pressing and holding MODE. In the automatic program, the machine adjusts the settings weekly on its own. Note: After each incubation, perform a RESET (pressing + and - simultaneously) to reset the days.

2. What do I do for birds without a ready program (e.g., turkey)? Use the manual program (Custom) at 37.8°C. For turkey, gradually increase the humidity from 60% (1st day) to 80% (last days).

3. How is the transition to hatching done? In the last 2-3 days, disconnect the motor, remove the roller shelf, and place the eggs on the hatching base.

4. What happens in case of a power outage? The machine can last 12-14 hours if kept closed and at room temperature. Use the terminals to connect to a 12V battery.

5. When do I perform candling? Sample on the 8th-9th day, using the built-in candling device in the thermostat in a dark room.

6. The humidity is higher than the setting. Is this a problem? No, as long as the channels are filled with water. If the display shows 70-80% while you have set 60%, incubation continues normally.

• Never operate the machine without water.

• Do not throw away the packaging and protective polystyrene.

• Transfer the chicks to a brooder immediately after they dry, so that the humidity of the remaining eggs is not affected.

• Calibration (Reset): If the days "stick" after a power outage, press and hold + and - to reset.