Skroutz.cy

SKM Single-phase Pump Waste Water / Sewage 0.33hp 01.12.24
Submersible Water Pumps

SKM Single-phase Pump Waste Water / Sewage 0.33hp 01.12.24

Model: JV250F

Brand: Italian technology

Certification: A high-quality single-phase submersible pump designed for excellent performance. The use of this pump is suitable for pumping sewage, industrial...

Model: JV250F

Brand: Italian technology

Certification: A high-quality single-phase submersible pump designed for excellent performance. The use of this pump is suitable for pumping sewage, industrial waste, liquids with solid residues up to approximately 35mm in diameter, dirty water with a maximum liquid temperature of 40°C and pH 4~10. It is specifically...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
156 00 €
156 Coins 156 Coins
Delivery Wed, 07 Oct - Fri, 09 Oct
28,00 € shipping cost
Do you want it with 23,00 € shipping?
Sent from Greece
From Shopaholic
Greece
5 pieces
See Water Pumps on the page of Shopaholic
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Model: JV250F

Brand: Italian technology

Certification: A high-quality single-phase submersible pump designed for excellent performance. The use of this pump is suitable for pumping sewage, industrial waste, liquids with solid residues up to approximately 35mm in diameter, dirty water with a maximum liquid temperature of 40°C and pH 4~10. It is specifically designed for safe and efficient operation with high flow, even at the maximum manometric point of use.

The stainless steel motor protection cover and the cast iron pump body provide the pump with strong resistance to high pressures and exceptional protection against corrosion. It features an automatic motor protection system against overheating and overload, ensuring safer and more reliable operation of the pump. It comes with NSK bearings of Japanese origin and a cable length of 10m.

Pump technical specifications:

  • POWER: 0.33hp
  • FLOW RATE (max): 9m³/h
  • CURRENT: Single-phase (220V)
  • MANOMETRIC (max): 7.5m
  • OUTLET SIZE: 1.5″, 1.25″, 1″ (inches)
  • MAXIMUM DEPTH OF SUBMERSION: 5m

Flow Rate (m³/h): 0 1 2 3 4 5 6 7 8

Flow Rate (l/min): 0 16.6 33.3 50 66.6 83.3 100 133.3

Manometric (m): 7.5 6.7 6.3 5.9 5.4 4.8 3.3

Correct usage tips:

  • First, bleed the pump.
  • The pump should never run without water.
  • When operating in a well, it must always be covered by water for cooling.
  • Operating the pump in sandy water can cause damage as it clogs the impellers.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
247.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Model: JV250F

Brand: Italian technology

Certification: A high-quality single-phase submersible pump designed for excellent performance. The use of this pump is suitable for pumping sewage, industrial waste, liquids with solid residues up to approximately 35mm in diameter, dirty water with a maximum liquid temperature of 40°C and pH 4~10. It is specifically designed for safe and efficient operation with high flow, even at the maximum manometric point of use.

The stainless steel motor protection cover and the cast iron pump body provide the pump with strong resistance to high pressures and exceptional protection against corrosion. It features an automatic motor protection system against overheating and overload, ensuring safer and more reliable operation of the pump. It comes with NSK bearings of Japanese origin and a cable length of 10m.

Pump technical specifications:

  • POWER: 0.33hp
  • FLOW RATE (max): 9m³/h
  • CURRENT: Single-phase (220V)
  • MANOMETRIC (max): 7.5m
  • OUTLET SIZE: 1.5″, 1.25″, 1″ (inches)
  • MAXIMUM DEPTH OF SUBMERSION: 5m

Flow Rate (m³/h): 0 1 2 3 4 5 6 7 8

Flow Rate (l/min): 0 16.6 33.3 50 66.6 83.3 100 133.3

Manometric (m): 7.5 6.7 6.3 5.9 5.4 4.8 3.3

Correct usage tips:

  • First, bleed the pump.
  • The pump should never run without water.
  • When operating in a well, it must always be covered by water for cooling.
  • Operating the pump in sandy water can cause damage as it clogs the impellers.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
247.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

156,00 €
28,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Κέρδισε ένα κουπόνι 50€ για την επόμενη αγορά σου!
Κέρδισε ένα κουπόνι 50€ για την επόμενη αγορά σου!
Δες πώς εδώ