Berling Hammered paint provides metal surfaces with protection against corrosion and gives them a hammered finish. It is touch-dry in approximately 15 minutes and can be applied directly to clean iron surfaces.
A suitable primer is required on galvanized iron and aluminum. For application, the surface must be dry and free of dust and grease. Apply 2 coats to new and previously painted metal surfaces; recoat after 16 hours.
- Type: Solvent-based metal paint
- Color: Gray
- Finish: Hammered
- Properties: Anti-corrosive, quick-drying
- Volume: 0.75 L
- Coverage: 8–10 m²/L
- Touch-dry time: Approximately 15 minutes
- Recoating time: 16 hours
- Thinning: Thin with Solvent E by 2–4% by volume, depending on the application method
- Application: With a brush or roller
- Application temperature: 10–35 °C
- Relative humidity during application: Up to 80%
- Tool cleaning: With Solvent E
- VOC content: Up to 500 g/L
- Standard: ISO 2811
- Product Number
- 116900.075
Product Details
- Type
- Metal
- Type
- Varnish Colour
- Colour
- Grey
- Quantity in lt
- 0.75 lt
Especially
- Properties
- Anti-Corrossion
- Finish
- Wrought
- Acrilyc
- No
- Water
- No
- Solvent
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.