Skroutz.cy

Makita Three-phase Pump Waste Water / Sewage 0.5hp PF0410
Submersible Water Pumps

Makita Three-phase Pump Waste Water / Sewage 0.5hp PF0410

Key features:

  • Maximum pump immersion: 5m
  • Cable length: 10m
  • Maximum temperature: 35°C
  • Outlet: 1"-1¼"-1 1/2"
  • Performance: 8400 lit/h
  • Power: 400 W
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Three-Phase

    It is mainly used for pumps and other industrial devices that require greater power or higher efficiency. Three-phase power supply is ideal for large installations or applications with increased energy demands.

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

106 32 €
107 Coins 107 Coins
Delivery Mon, 27 Jul - Fri, 31 Jul
4,00 € to a Skroutz Point or 5,00 € to an address
Do you want it with Free shipping?
Sent from Greece
From Getters 4.5 (108)
4.5 (108 reviews)
Greece
16 pieces
See Water Pumps on the page of Getters
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

Submersible sewage pump from the manufacturer Makita, used for pumping dirty water that may contain particles. Ideal for draining water from wells, tanks, and pools, irrigation, dirty water.

Features

For particles up to 35mm in size, with an induction motor and a submersion depth of up to 5m, ideal for draining water from wells, tanks, and pools, pumping water for irrigation or transfer.

  • Submersible dirty water pump
  • Lightweight and compact design
  • Ideal for emptying flooded areas or tanks, draining clean water, and irrigating the garden and orchard.
  • Pump Body: Polypropylene

Specifications

  • Maximum pump submersion: 5m
  • Cable length: 10m
  • Maximum temperature: 35°C
  • Voltage: 230V AC
  • Outlet: 1"-1¼"-1 1/2"
  • Performance: 8400 lit/h
  • Power: 400 W
  • Number of revolutions: 2800 rpm
  • Maximum head: 5m
  • Minimum water level: 40mm
  • Weight: 4.27 kg
  • Dimensions: 160x168x345mm
  • Motor type: Induction (brushless)

Includes: Hose connector

Brushless Motor

Less wear, greater performance

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear and tear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain their torque at all speeds, do not overheat, and require no maintenance.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Three-Phase

Voltage

Three-Phase

It is mainly used for pumps and other industrial devices that require greater power or higher efficiency. Three-phase power supply is ideal for large installations or applications with increased energy demands.
Horsepower
0.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
375 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2", 1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
5 m

Maximum Head Height: 5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
5 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (5)

Reviews

4.4
5
4.4
Review this product
  1. 3
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • giannis_koumpounis
    3
    giannis_koumpounis

    For 5 years it did its job perfectly in a garage ramp drain, for rainwater when and if it rained. Now the motor burned out and it trips the leakage relay. Satisfied, but I would have expected it to last more years.

    Translated from Greek ·
    Did you find this review helpful?
  • Greg Panagiotou
    5
    1 out of 1 members found this review helpful
    Greg Panagiotou

    Very good for the money it costs. I use it for pumping rainwater that collects in a well in the garden. The strange thing is that it lifts the rainwater to a height of 3 meters (with a 45-degree slope of the pipe), and then it pours it into a 10-meter pipe. The pipe is the classic green one with white rings (I don't know what it's called). Normally, with this strain (3 meters height), I should have gotten the larger one, but okay, this one does its job comfortably. Trouble-free. Recommended...

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Θάσος

    Verified purchase

  • 5
    Michael_Bastounis

    Verified purchase

  • 5
    Marios_Karathanasopoulos
    Expert user

    Verified purchase

  • giannis_koumpounis
    3
    giannis_koumpounis

    For 5 years it did its job perfectly in a garage ramp drain, for rainwater when and if it rained. Now the motor burned out and it trips the leakage relay. Satisfied, but I would have expected it to last more years.

    Translated from Greek ·
    0
  • Greg Panagiotou
    5
    Greg Panagiotou

    Very good for the money it costs. I use it for pumping rainwater that collects in a well in the garden. The strange thing is that it lifts the rainwater to a height of 3 meters (with a 45-degree slope of the pipe), and then it pours it into a 10-meter pipe. The pipe is the classic green one with white rings (I don't know what it's called). Normally, with this strain (3 meters height), I should have gotten the larger one, but okay, this one does its job comfortably. Trouble-free. Recommended...

    Translated from Greek ·
    1
  • 4
    Θάσος

    0
  • 5
    Michael_Bastounis

    0
  • 5
    Marios_Karathanasopoulos

    0
  • See all
Questions (1)

Questions

16 users have this product and can help you

Ask for the product
0 Replies Reply to
See all questions (1)

Description & Specifications

Submersible sewage pump from the manufacturer Makita, used for pumping dirty water that may contain particles. Ideal for draining water from wells, tanks, and pools, irrigation, dirty water.

Features

For particles up to 35mm in size, with an induction motor and a submersion depth of up to 5m, ideal for draining water from wells, tanks, and pools, pumping water for irrigation or transfer.

  • Submersible dirty water pump
  • Lightweight and compact design
  • Ideal for emptying flooded areas or tanks, draining clean water, and irrigating the garden and orchard.
  • Pump Body: Polypropylene

Specifications

  • Maximum pump submersion: 5m
  • Cable length: 10m
  • Maximum temperature: 35°C
  • Voltage: 230V AC
  • Outlet: 1"-1¼"-1 1/2"
  • Performance: 8400 lit/h
  • Power: 400 W
  • Number of revolutions: 2800 rpm
  • Maximum head: 5m
  • Minimum water level: 40mm
  • Weight: 4.27 kg
  • Dimensions: 160x168x345mm
  • Motor type: Induction (brushless)

Includes: Hose connector

Brushless Motor

Less wear, greater performance

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear and tear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain their torque at all speeds, do not overheat, and require no maintenance.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Three-Phase

Voltage

Three-Phase

It is mainly used for pumps and other industrial devices that require greater power or higher efficiency. Three-phase power supply is ideal for large installations or applications with increased energy demands.
Horsepower
0.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
375 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2", 1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
5 m

Maximum Head Height: 5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
5 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (5)

4.4
5
4.4
Review this product
  1. 3
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • giannis_koumpounis
    3
    giannis_koumpounis

    For 5 years it did its job perfectly in a garage ramp drain, for rainwater when and if it rained. Now the motor burned out and it trips the leakage relay. Satisfied, but I would have expected it to last more years.

    Translated from Greek ·
    Did you find this review helpful?
  • Greg Panagiotou
    5
    1 out of 1 members found this review helpful
    Greg Panagiotou

    Very good for the money it costs. I use it for pumping rainwater that collects in a well in the garden. The strange thing is that it lifts the rainwater to a height of 3 meters (with a 45-degree slope of the pipe), and then it pours it into a 10-meter pipe. The pipe is the classic green one with white rings (I don't know what it's called). Normally, with this strain (3 meters height), I should have gotten the larger one, but okay, this one does its job comfortably. Trouble-free. Recommended...

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    Θάσος

    Verified purchase

  • 5
    Michael_Bastounis

    Verified purchase

  • 5
    Marios_Karathanasopoulos
    Expert user

    Verified purchase

  • giannis_koumpounis
    3
    giannis_koumpounis

    For 5 years it did its job perfectly in a garage ramp drain, for rainwater when and if it rained. Now the motor burned out and it trips the leakage relay. Satisfied, but I would have expected it to last more years.

    Translated from Greek ·
    0
  • Greg Panagiotou
    5
    Greg Panagiotou

    Very good for the money it costs. I use it for pumping rainwater that collects in a well in the garden. The strange thing is that it lifts the rainwater to a height of 3 meters (with a 45-degree slope of the pipe), and then it pours it into a 10-meter pipe. The pipe is the classic green one with white rings (I don't know what it's called). Normally, with this strain (3 meters height), I should have gotten the larger one, but okay, this one does its job comfortably. Trouble-free. Recommended...

    Translated from Greek ·
    1
  • 4
    Θάσος

    0
  • 5
    Michael_Bastounis

    0
  • 5
    Marios_Karathanasopoulos

    0
  • See all
106,32 €
4,00 € to a Skroutz Point