Skroutz.cy

Anavalos Single-phase Pump Waste Water / Sewage 1.46hp
Submersible Water Pumps

Anavalos Single-phase Pump Waste Water / Sewage 1.46hp

ARIGO X 1100 C: Pump entirely made of stainless steel. Closed asynchronous motor, shaft sealing with double mechanical seal (made of silicon carbon/ceramic), shaft made of AISI 304 stainless steel.

...

ARIGO X 1100 C: Pump entirely made of stainless steel. Closed asynchronous motor, shaft sealing with double mechanical seal (made of silicon carbon/ceramic), shaft made of AISI 304 stainless steel.

Maximum submersion depth: up to 5 meters. Power cable type HO7RNF and length of 10 meters. A key feature is that it has a chopper impeller for shredding the...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    10

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
392 68 €
393 Coins 393 Coins
Delivery Thu, 01 Oct - Wed, 07 Oct
61,00 € shipping cost
Do you want it with 56,00 € shipping?
Sent from Greece
From Utools 4.9 (47)
4.9 (47 reviews)
Greece
1 piece
See Water Pumps on the page of Utools
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

ARIGO X 1100 C: Pump entirely made of stainless steel. Closed asynchronous motor, shaft sealing with double mechanical seal (made of silicon carbon/ceramic), shaft made of AISI 304 stainless steel.

Maximum submersion depth: up to 5 meters. Power cable type HO7RNF and length of 10 meters. A key feature is that it has a chopper impeller for shredding the incoming fluid into pieces for easy passage through the pump without blockages.

Applications:

  • Non-clogging pump for pumping municipal wastewater and groundwater.
  • Emptying pits and tanks of foul water.
  • Industrial use.
  • Also ideal for pumping seawater or water with high salinity.

Features:

  • Double mechanical seal.
  • Thermal protection.
  • IP68.
  • Insulation class F.
  • Shaft made of AISI 304 stainless steel.
  • Chopper impeller.
  • Outlet nozzle 1''1/2.

Performance:

  • Flow rate up to 18 m3/h.
  • Manometric head up to 10 m.
  • Electric motor power 1100W - 220V.

Operating Conditions:

  • Water temperature up to 40 °C.
  • Ambient temperature up to 40 °C.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
18 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

ARIGO X 1100 C: Pump entirely made of stainless steel. Closed asynchronous motor, shaft sealing with double mechanical seal (made of silicon carbon/ceramic), shaft made of AISI 304 stainless steel.

Maximum submersion depth: up to 5 meters. Power cable type HO7RNF and length of 10 meters. A key feature is that it has a chopper impeller for shredding the incoming fluid into pieces for easy passage through the pump without blockages.

Applications:

  • Non-clogging pump for pumping municipal wastewater and groundwater.
  • Emptying pits and tanks of foul water.
  • Industrial use.
  • Also ideal for pumping seawater or water with high salinity.

Features:

  • Double mechanical seal.
  • Thermal protection.
  • IP68.
  • Insulation class F.
  • Shaft made of AISI 304 stainless steel.
  • Chopper impeller.
  • Outlet nozzle 1''1/2.

Performance:

  • Flow rate up to 18 m3/h.
  • Manometric head up to 10 m.
  • Electric motor power 1100W - 220V.

Operating Conditions:

  • Water temperature up to 40 °C.
  • Ambient temperature up to 40 °C.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
18 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

392,68 €
61,00 € 66,00 €   shipping cost