Skroutz.cy

Anavalos Single-phase Pump Waste Water / Sewage 1.46hp
Submersible Water Pumps

Anavalos Single-phase Pump Waste Water / Sewage 1.46hp

ARMO GX 1100 C: VORTEX impeller made of cast iron, pump/motor body made of cast iron and stainless steel 304, with built-in thermal protection and permanent running capacitor. Closed asynchronous...

ARMO GX 1100 C: VORTEX impeller made of cast iron, pump/motor body made of cast iron and stainless steel 304, with built-in thermal protection and permanent running capacitor. Closed asynchronous motor, shaft sealing with double mechanical seal (made of silicon carbon/ceramic), shaft made of stainless steel AISI 304. Maximum immersion depth: up to 5 meters....

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    12

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
390 40 €
Delivery Thu, 16 Jul - Mon, 20 Jul
61,00 € shipping cost
Do you want it with 56,00 € shipping?
Sent from Greece
From E-Anastasiadis 5.0 (4)
5.0 (4 reviews)
Greece
1 piece
See Water Pumps on the page of E-Anastasiadis
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

ARMO GX 1100 C: VORTEX impeller made of cast iron, pump/motor body made of cast iron and stainless steel 304, with built-in thermal protection and permanent running capacitor. Closed asynchronous motor, shaft sealing with double mechanical seal (made of silicon carbon/ceramic), shaft made of stainless steel AISI 304. Maximum immersion depth: up to 5 meters. HO7RN-F type power cable with a length of 5 meters.

  • Range of small power pumps (for residential use) with excellent performance and high energy savings.
  • Equipped with an impeller with SHREDDERS to chop incoming wastewater into small pieces.
  • Designed for multiple uses for pumping urban wastewater, seepage water, flooding in basements, emptying pits and tanks of dirty water and water with sand.
  • Impeller design that prevents clogging and uses durable materials that prevent corrosion.
  • Ideal for pumping seawater or water with high salt content.

Attention: Regularly check and clean the suction of the pump. Do not pull the pump by its cable. Ensure the pump is always fully submerged in the pumped water. Check that the float is free to move. Rinse the pump thoroughly with clean water when it will not be used for an extended period. Adjust the float to stop before the liquid level falls below the height of the motor body.

  • Features:
  • Drainage pumps for dirty water and light wastewater
  • Double mechanical seal
  • Thermal protection
  • IP68
  • Insulation class F
  • Shaft made of stainless steel AISI 304
  • Outlet diameter 2''

Performance: Flow rate up to 15 m3/h, Head up to 12 m, Electric motor power of 1100W. Applications: Small pits or tanks, garages, basements, household use for dirty water and light wastewater. Operating Conditions: Water temperature up to 40 °C, Ambient temperature up to 40 °C.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
12 m

Maximum Head Height: 12


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
15 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

ARMO GX 1100 C: VORTEX impeller made of cast iron, pump/motor body made of cast iron and stainless steel 304, with built-in thermal protection and permanent running capacitor. Closed asynchronous motor, shaft sealing with double mechanical seal (made of silicon carbon/ceramic), shaft made of stainless steel AISI 304. Maximum immersion depth: up to 5 meters. HO7RN-F type power cable with a length of 5 meters.

  • Range of small power pumps (for residential use) with excellent performance and high energy savings.
  • Equipped with an impeller with SHREDDERS to chop incoming wastewater into small pieces.
  • Designed for multiple uses for pumping urban wastewater, seepage water, flooding in basements, emptying pits and tanks of dirty water and water with sand.
  • Impeller design that prevents clogging and uses durable materials that prevent corrosion.
  • Ideal for pumping seawater or water with high salt content.

Attention: Regularly check and clean the suction of the pump. Do not pull the pump by its cable. Ensure the pump is always fully submerged in the pumped water. Check that the float is free to move. Rinse the pump thoroughly with clean water when it will not be used for an extended period. Adjust the float to stop before the liquid level falls below the height of the motor body.

  • Features:
  • Drainage pumps for dirty water and light wastewater
  • Double mechanical seal
  • Thermal protection
  • IP68
  • Insulation class F
  • Shaft made of stainless steel AISI 304
  • Outlet diameter 2''

Performance: Flow rate up to 15 m3/h, Head up to 12 m, Electric motor power of 1100W. Applications: Small pits or tanks, garages, basements, household use for dirty water and light wastewater. Operating Conditions: Water temperature up to 40 °C, Ambient temperature up to 40 °C.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
12 m

Maximum Head Height: 12


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
15 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

390,40 €
61,00 € 66,00 €   shipping cost