The Aruba AP-503 (RW) access point provides dual-band Wi‑Fi 6 connectivity at 2.4 GHz and 5 GHz, with 2x2 MIMO technology. It is suitable for indoor use and features one RJ‑45 Ethernet port with LAN speeds of up to 1000 Mbps, as well as PoE support.
The built-in omnidirectional antenna offers a gain of up to 1.7 dBi in the 2.4 GHz band and up to 4.8 dBi in the 5 GHz band. WPA, WPA2 and WPA3 are supported. The access point also features a TPM module, a reset button, and LED indicators for reset, status and system.
- Wi‑Fi generation: Wi‑Fi 6
- Networking standards: IEEE 802.11a, 802.11b/g/n, 802.11ac, 802.11ax
- Frequency: Dual-band 2.4 GHz and 5 GHz
- Maximum WLAN speed: 1467 Mbps
- MIMO technology: 2x2
- Antenna type: Built-in omnidirectional
- Maximum antenna gain: 1.7 dBi at 2.4 GHz and 4.8 dBi at 5 GHz
- Ethernet ports: 1 RJ‑45
- LAN speed: 1000 Mbps
- USB ports: 1 USB Type‑A
- USB version: USB 2.0
- PoE support: Yes
- Security: WPA, WPA2 and WPA3
- Features: TPM module, reset button and LED indicators
- Mounting: Indoor
- Weight: 255 g
- Dimensions: 145 x 145 x 35 mm
- Operating temperature: 0–40 °C
- Storage temperature: −25–55 °C
- Operating relative humidity: 10–100%
- Relative humidity range: 5–95%
- Certification: Low Voltage Directive (LVD)
- Packaging: Single kit
Technical Specifications
- Frequency
- Dual Band (2.4 & 5GHz)
- Maximum WLAN Speed
- 1467 Mbps
- Wi-Fi Generation
- Wi‑Fi 6
- IEEE Networking Standards
- 802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
- LAN speed
- 1000 Mbps
- Wi-Fi Mesh Network
- No
- Ethernet Backhaul
- No
- Antenna Power (max)
- 4.8 dBi
- PoE Support
- PoE
- MIMO Technology
- 2x2
General Characteristics
- Placement
- Indoor
- Ethernet Ports
- 1
- USB
- USB 2.0
- Packaging
- Single Kit
Installation Type
- Ceiling
- No
- Wall
- No
- Board games
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.