Skroutz.cy

Giorgio Graesan Paint for Faux Finishes La Casa Dei Sogni White 2.5lt 30gr
Special Paint & Additives

Giorgio Graesan Paint for Faux Finishes La Casa Dei Sogni White 2.5lt 30gr

La Casa dei Sogni is a decorative water-based paint that replicates the effect of an old wall.

TECHNICAL CHARACTERISTICS:

  • Specific weight: 1.05 30 gr / lt at 25 °C
  • Coverage: 5-6 m² / lt per coat...

La Casa dei Sogni is a decorative water-based paint that replicates the effect of an old wall.

TECHNICAL CHARACTERISTICS:

  • Specific weight: 1.05 30 gr / lt at 25 °C
  • Coverage: 5-6 m² / lt per coat (may vary depending on the roughness, absorbency of the surface, and method of application)
  • Finish: matte aged
  • pH: 6.2-7.5
  • Vapor permeability - Shelf life:...
See Description & Specifications See Description & Specifications

Learn more about invoicing
Questions
Review the product
Product report

Description & Specifications

La Casa dei Sogni is a decorative water-based paint that replicates the effect of an old wall.

TECHNICAL CHARACTERISTICS:

  • Specific weight: 1.05 ± 30 gr / lt at 25 °C
  • Coverage: 5-6 m² / lt per coat (may vary depending on the roughness, absorbency of the surface, and method of application)
  • Finish: matte aged
  • pH: 6.2-7.5
  • Vapor permeability - Shelf life: Maintained for at least 2 years
  • Colors: White (can be colored with GgF pigments)

DRYING:

  • Surface: 60’ at 20°C
  • Repainting: 2-4 hours at 20°C
  • In depth: 6 hours at 20°C
  • Packaging: 1L – 2.5L and 5L

SURFACE PREPARATION:

  • Old surface: Remove all flaking old paints and clean. Apply a stabilizing primer and, when dry, apply a coat of PRIMUS SABBIA. After 4-6 hours at 20°C, proceed with the application of La Casa dei Sogni.
  • New surface: Clean and sand the surface. Apply a coat of suitable primer and, when dry, apply a coat of PRIMUS SABBIA. After 4-6 hours at 20°C, proceed with the application of La Casa dei Sogni.

APPLICATION:

LA CASA DEI SOGNI is ready to use. Prepare the shades with the pigments indicated in the sample collection, mix manually, and proceed with the application. Distribute the material on the wall surface with the classic palm movement of the hand. If you want the work to look more aged, go over it with a damp glove after 15-30 minutes. For a more uniform appearance, reapply the same product.

NOTES:

The application temperature should be between +10 °C and +30 °C. Clean tools immediately after use with water and soap. Maintained for at least 2 years in its sealed original packaging.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Paint for Faux Finishes
Colour
White
Acrilyc
No
Luminosity
Matt

Quantity

Volume
2.5 lt
Weight
0.03 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

71,98 €
3,50 € to a Skroutz Point