Chromodomi white line-marking paint is applied with a brush or roller. Thin with nitro thinner at a rate of 5–10%; coverage is 2.5–3 m² per kg. It dries in 10–20 minutes, depending on application conditions, and achieves full mechanical resistance after 20–30 days.
Before application, clean the surface of dust, grease, oil, flaking old paint, rust, mould residue and moisture. Stir the paint thoroughly before use. Do not apply at temperatures below 6 °C or above 40 °C, or when relative humidity exceeds 80%. Keep tools wet in the container while working, clean them immediately with nitro thinner, and do not discharge wash water into groundwater.
- Type: Line-marking paint
- Colour: White
- Weight: 1 kg
- Coverage: 2.5–3 m²/kg
- Thinning: 5–10% with nitro thinner
- Drying time: 10–20 minutes
- Mechanical resistance: After 20–30 days
- Application tools: Brush, roller
- Application temperature: From 6 °C to 40 °C
- Maximum relative humidity for application: 80%
Specifications
- Type
- Road Marking Paint
- Colour
- White
- Acrilyc
- No
Quantity
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.