Main Specifications

Type

Hydromassage

Type

Hydromassage

Pump that circulates the water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles placed on the walls or the bottom of the pool) to create the hydromassage effect.

Power (hp)

1.5 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.

Power Source

Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.

Motor Type

Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.

Suitable for Saltwater

No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.

Pool Size

Standard Domestic (50 to 90 m³)

Filter Included

No

Performance

Maximum Supply

11000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.

Maximum Head of a Pump

23 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle

50 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

• The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
• The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.