Fluid, non-shrink, high-strength repair mortar VIMACRET POWER, 25kg.

Properties:

• Very good workability and fluidity.
• Excellent adhesion to the substrate and steel reinforcement.
• High resistance to fatigue, thermal cycles, and high temperatures.
• High mechanical strengths.
• Low water absorption.

Classified as a repair mortar for load-bearing concrete elements type CCR4 according to the standard EN 1504-3.

Applications:

• Restoration or reinforcement of cross-section.
• Anchoring and fixing of machinery (lathes, presses, crushers, etc.).
• Replacement of deteriorated concrete.
• Increase of the cover thickness of the reinforcement.

Instructions for use:

The substrate must be solid, free from dust, weak materials, and loose parts. Before using VIMACRET POWER, the substrate should be well wetted. The joints of the formwork must be sealed before the injection of the material. The dry mortar is added to the water gradually while stirring until a homogeneous mixture is obtained. Approximately 4.2 kg of water is required for each bag of VIMACRET POWER. Care should be taken during application to avoid the risk of air entrapment. Product for professional use. The ambient temperature during application should be between +5°C and +35°C.

Consumption:

To fill a volume of 1 L with fresh mortar, approximately 2 kg of dry VIMACRET POWER mortar is required.

Preparation of the substrate:

The substrate should be solid and free from dust and weak materials. Before applying VIMACRET POWER, the surface should be well wetted.

Mixing - Application:

VIMACRET POWER is added to the water gradually and mixed until the mixture achieves homogeneity. Approximately 6-6.25 kg of water is required for each bag. The working time of the fresh mortar is about 2 hours.