Skroutz.cy

Plus Single-Phase Pool Water Filter Pump with Power 1hp and Maximum Water Supply 18 lt/h
Pool Water Pumps

Plus Single-Phase Pool Water Filter Pump with Power 1hp and Maximum Water Supply 18 lt/h

Self-priming pump with pre-filter, suitable for pool circulation and filtration, especially where high flow is required.

Recommended for pools up to 180m³.

Self-priming pump with pre-filter, suitable for pool circulation and filtration, especially where high flow is required.

Recommended for pools up to 180m³.

See full description See full description

Top specs

  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Small (up to 50 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • Pump Weight 4 kg
  • See all
126 90 €
127 Coins 127 Coins
Delivery Wed, 26 Aug - Fri, 28 Aug
9,00 € to a Skroutz Point or 10,00 € to an address
Do you want it with 4,00 € shipping to Skroutz Point?
Sent from Greece
From MdTools 5.0 (46)
5.0 (46 reviews)
Greece
3 pieces
See Swimming Pool Equipment on the page of MdTools
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Product report

Description

Description

Self-priming pump with pre-filter, suitable for pool circulation and filtration, especially where high flow is required.

Recommended for pools up to 180m³.

At a glance

  • Nominal power: 1 HP | 736 W 
  • Maximum flow rate: 18 m³/h 
  • Maximum head: 11 m 
  • Inlet port: 1+1/2'' (40mm) 
  • Outlet port: 1+1/2'' (40mm)
  • Weight: 4kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
1 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
750 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Pump Weight
4 kg
Filter Included
No

Performance

Maximum Supply
18 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
10 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
40 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (3)

Reviews

3.7
3
3.7
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
Questions

Questions

Do you have a question about the product?

6 users have this product and can help you

Ask for the product

Description & Specifications

Self-priming pump with pre-filter, suitable for pool circulation and filtration, especially where high flow is required.

Recommended for pools up to 180m³.

At a glance

  • Nominal power: 1 HP | 736 W 
  • Maximum flow rate: 18 m³/h 
  • Maximum head: 11 m 
  • Inlet port: 1+1/2'' (40mm) 
  • Outlet port: 1+1/2'' (40mm)
  • Weight: 4kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
1 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
750 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Pump Weight
4 kg
Filter Included
No

Performance

Maximum Supply
18 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
10 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
40 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

3.7
3
3.7
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
126,90 €
9,00 € to a Skroutz Point
or   10,00 €   shipping cost