Skroutz.cy

SSD 256GB 2.5'' SATA III HS-SSD-E100(STD)/256G
SSD Hard Drives

SSD 256GB 2.5'' SATA III HS-SSD-E100(STD)/256G

The Hiksemi HS-SSD-E100(STD) SSD has a capacity of 256 GB and a 2.5-inch form factor, suitable for use in laptops. It connects via SATA III and uses 3D TLC flash memory.

  • Capacity: 256 GB
  • Form factor:...

The Hiksemi HS-SSD-E100(STD) SSD has a capacity of 256 GB and a 2.5-inch form factor, suitable for use in laptops. It connects via SATA III and uses 3D TLC flash memory.

  • Capacity: 256 GB
  • Form factor: 2.5 inches
  • Interface: SATA III
  • Read speed: up to 550 MB/s
  • Write speed: 450 MB/s
  • Flash memory type: 3D TLC
  • Use: Laptops
  • MTBF: 2,000,000 hours
  • Write endurance:...
See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    SATA III

    Modern hard drive connection standard.

    The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.

  • Write Speed

    Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

    For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

  • Read Speed

    Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

    An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
  • Usage Laptops
  • See all
56 29 €
40,00 € discount with a coupon from evomag
applied directly to your cart

Deals & Benefits

40€ coupon from the shop evomag until 04/11!

The coupon can be redeemed:

  • Excluding items made by Samsung, Apple
  • Exclusively for items sold by evomag
  • Only for a cart with value at least 370€
You earn a 10,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε κουπόνι 10€ με αγορά μέσω App!

Το θέλεις; Θα το ‘χεις! Κάνε μια παραγγελία άνω των 50€ από το Skroutz App μέσα στο ΣΟΥΚΟΥ και κέρδισε κουπόνι 10€ για την επόμενη παραγγελία σου άνω των 50€.

Η προσφορά ισχύει μέχρι την Κυριακή, 01/11, γι' αυτό βιάσου.

  • Απαραίτητη προϋπόθεση είναι η αγορά μέσω του Skroutz App.
  • Το κουπόνι 10€ ισχύει για μία (1) παραγγελία συνολικής αξίας προϊόντων άνω των 50€ με διεύθυνση αποστολής στην Κύπρο.
  • Το κουπόνι αποδίδεται αμέσως μετά την ολοκλήρωση της παραγγελίας με διάρκεια 5 ημέρες από την ημερομηνία απόδοσής του.

Terms & conditions apply
Delivery Tuesday, 10 November
9,00 € to a Skroutz Point or 10,00 € to an address
Do you want it with Free shipping to Skroutz Point?
Sent from Romania
From evomag 4.7 (33)
4.7 (33 reviews)
Romania
1 piece
See Hard Drives on the page of evomag
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Product report

Description

Description

The Hiksemi HS-SSD-E100(STD) SSD has a capacity of 256 GB and a 2.5-inch form factor, suitable for use in laptops. It connects via SATA III and uses 3D TLC flash memory.

  • Capacity: 256 GB
  • Form factor: 2.5 inches
  • Interface: SATA III
  • Read speed: up to 550 MB/s
  • Write speed: 450 MB/s
  • Flash memory type: 3D TLC
  • Use: Laptops
  • MTBF: 2,000,000 hours
  • Write endurance: 120 TBW
  • Idle power consumption: 0.37 W
  • Power consumption during reading: 1.15 W
  • Power consumption during writing: 1.2 W
  • Dimensions: 69.9 × 100.1 × 7 mm
  • Weight: under 45 g
  • Operating temperature: 0–70 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
256 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Device Group
Laptops
Cache Type
-
Write Endurance (TBW)
-

Write Endurance (TBW)

Shows the total amount of data (in TB) that the SSD can write over its lifetime, according to the manufacturer’s specifications. A higher value means greater theoretical endurance for frequent data writes.
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Performance

Read Speed
550 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
450 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Questions

Questions

Do you have a question about the product?

3 users have this product and can help you

Ask for the product

Description & Specifications

The Hiksemi HS-SSD-E100(STD) SSD has a capacity of 256 GB and a 2.5-inch form factor, suitable for use in laptops. It connects via SATA III and uses 3D TLC flash memory.

  • Capacity: 256 GB
  • Form factor: 2.5 inches
  • Interface: SATA III
  • Read speed: up to 550 MB/s
  • Write speed: 450 MB/s
  • Flash memory type: 3D TLC
  • Use: Laptops
  • MTBF: 2,000,000 hours
  • Write endurance: 120 TBW
  • Idle power consumption: 0.37 W
  • Power consumption during reading: 1.15 W
  • Power consumption during writing: 1.2 W
  • Dimensions: 69.9 × 100.1 × 7 mm
  • Weight: under 45 g
  • Operating temperature: 0–70 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
256 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Device Group
Laptops
Cache Type
-
Write Endurance (TBW)
-

Write Endurance (TBW)

Shows the total amount of data (in TB) that the SSD can write over its lifetime, according to the manufacturer’s specifications. A higher value means greater theoretical endurance for frequent data writes.
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Performance

Read Speed
550 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
450 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
56,29 €
9,00 € to a Skroutz Point
or   10,00 €   shipping cost
Hiksemi