3D Printer Filament

Azurefilm PLA 3D Printer Filament 1.75mm Silk Graphite Grey 1kg (FPL-SA0001) Code: FPL-SA0001

Azurefilm PLA Silk Graphite Grey is a 3D printing PLA filament with a diameter of 1.75mm, weighing 1kg, and featuring a metallic finish in graphite grey (Silk Graphite Grey). Thanks to its silky...

Azurefilm PLA Silk Graphite Grey is a 3D printing PLA filament with a diameter of 1.75mm, weighing 1kg, and featuring a metallic finish in graphite grey (Silk Graphite Grey). Thanks to its silky texture, it offers a smooth, glossy surface, ideal for prints that require aesthetic detail and a premium appearance. It is easy to print with, has good bed...

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
This product is temporarily unavailable at Skroutz Last updated: 23 days ago

Description

Description

Azurefilm PLA Silk Graphite Grey is a 3D printing PLA filament with a diameter of 1.75mm, weighing 1kg, and featuring a metallic finish in graphite grey (Silk Graphite Grey). Thanks to its silky texture, it offers a smooth, glossy surface, ideal for prints that require aesthetic detail and a premium appearance. It is easy to print with, has good bed adhesion, and minimal warping, making it ideal for decorative objects, models, and prototypes. It is aimed at designers, artists, and creators who want quality prints with an impressive appearance.


Manufacturer

See full description

Specifications

Specifications

Product Number
FPL-SA0001
Material
PLA
Colour
Grey
Diameter
1.75 mm
Weight
1 kg
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (33)

Reviews

  1. 17
  2. 2
  3. 10
  4. 2
  5. 2
Review this product

What do users say? AI-generated summary

The overall picture is positive, with print quality and attractive, accurate color reproduction frequently praised. It is also noted that the filament prints smoothly with the right settings and can produce an impressive sheen. However, some users report tangles, filament breakage, and printing issues, and it requires a relatively low printing speed.

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Moderate quality. The purple color is quite translucent for PLA. In texture and appearance it feels like something between PLA and PETG, but that didn’t bother me much since I used it for prints of figures and toys for the little one...

    The serious issue is with the winding. Just like with the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and caught at the edges of the spool left and right, resulting in it breaking.
    Unacceptable, I will definitely NOT choose it again. Half the spool and many prints went in the trash. Unsuitable, it can hardly be used and may cause some damage; twice it tipped over the filament dryer...
    Fortunately it broke and the dryer didn’t fall from the shelf onto the floor.

    Translated from Greek ·
    2
  • See all
Questions

Questions

Do you have a question about the product?

25 users have this product and can help you

Ask for the product

Description & Specifications

Azurefilm PLA Silk Graphite Grey is a 3D printing PLA filament with a diameter of 1.75mm, weighing 1kg, and featuring a metallic finish in graphite grey (Silk Graphite Grey). Thanks to its silky texture, it offers a smooth, glossy surface, ideal for prints that require aesthetic detail and a premium appearance. It is easy to print with, has good bed adhesion, and minimal warping, making it ideal for decorative objects, models, and prototypes. It is aimed at designers, artists, and creators who want quality prints with an impressive appearance.


Manufacturer

Product Number
FPL-SA0001
Material
PLA
Colour
Grey
Diameter
1.75 mm
Weight
1 kg
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (33)

  1. 17
  2. 2
  3. 10
  4. 2
  5. 2
Review this product

What do users say? AI-generated summary

The overall picture is positive, with print quality and attractive, accurate color reproduction frequently praised. It is also noted that the filament prints smoothly with the right settings and can produce an impressive sheen. However, some users report tangles, filament breakage, and printing issues, and it requires a relatively low printing speed.

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Moderate quality. The purple color is quite translucent for PLA. In texture and appearance it feels like something between PLA and PETG, but that didn’t bother me much since I used it for prints of figures and toys for the little one...

    The serious issue is with the winding. Just like with the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and caught at the edges of the spool left and right, resulting in it breaking.
    Unacceptable, I will definitely NOT choose it again. Half the spool and many prints went in the trash. Unsuitable, it can hardly be used and may cause some damage; twice it tipped over the filament dryer...
    Fortunately it broke and the dryer didn’t fall from the shelf onto the floor.

    Translated from Greek ·
    2
  • See all