Skroutz.cy

Hager Automatic Circuit Breaker 10A Four-pole AC MCN410A
Automatic Circuit Breaker

Hager Automatic Circuit Breaker 10A Four-pole AC MCN410A

Poles 4P

C Curve

Capacity

  • Number of elements: 4

Installation, mounting

  • Maximum torque for upper terminal tightening: 2.80 - 2.80 Nm
  • Maximum torque for lower terminal tightening: 2.80 - 2.80 Nm
  • ...

Poles 4P

C Curve

Capacity

  • Number of elements: 4

Installation, mounting

  • Maximum torque for upper terminal tightening: 2.80 - 2.80 Nm
  • Maximum torque for lower terminal tightening: 2.80 - 2.80 Nm
  • Maximum crimping torque: 2.80 - 2.80 Nm
  • Lower connection type for rail materials: possible to use bifurcated bars
  • Connection type for rail materials: screwed...
See full description See full description
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Poles 4P

C Curve

Capacity

  • Number of elements: 4

Installation, mounting

  • Maximum torque for upper terminal tightening: 2.80 - 2.80 Nm
  • Maximum torque for lower terminal tightening: 2.80 - 2.80 Nm
  • Maximum crimping torque: 2.80 - 2.80 Nm
  • Lower connection type for rail materials: possible to use bifurcated bars
  • Connection type for rail materials: screwed terminals
  • Mounting capability: 360°

Main electrical characteristics

  • Rated short-circuit breaking capacity Icn AC according to IEC 60898-1: 6 kA
  • Rated operating voltage Ue: 230 - 400 V
  • Power supply voltage type: AC
  • Rated insulation voltage Ui: 500 V
  • Rated impulse withstand voltage Uimp: 4,000 V
  • Frequency: 50 - 60 Hz

Connection

  • Input and output cross-section with screws, for solid conductors: 1 - 35 mm²
  • Input and output cross-section with screws, for flexible conductors: 1 - 25 mm²
  • Input cross-section with screws, for flexible conductors: 1 - 25 mm²
  • Input cross-section with screws, for solid conductors: 1 - 35 mm²
  • Flexible conductor cross-section: 1 - 25 mm²
  • Solid conductor cross-section: 1 - 35 mm²

Protection

  • Protection category (IP): IP20

Conditions of use

  • Pollution degree according to IEC 60664 / IEC 60947-2: 2
  • I²t3 energy limiting class
  • Moisture protection: suitable for all climates
  • Operating temperature: -25 - 70 °C

Power

  • Total power loss at rated current In: 7.80 W

Connectivity

  • Connection type: screwed terminals
  • Alignment of upper connection for rail materials: aligned terminals
  • Alignment of lower connection for rail materials: aligned terminals

Dimensions

  • Height: 83 mm
  • Width: 70 mm
  • Depth: 70 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
4
Rated Current
10 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Poles 4P

C Curve

Capacity

  • Number of elements: 4

Installation, mounting

  • Maximum torque for upper terminal tightening: 2.80 - 2.80 Nm
  • Maximum torque for lower terminal tightening: 2.80 - 2.80 Nm
  • Maximum crimping torque: 2.80 - 2.80 Nm
  • Lower connection type for rail materials: possible to use bifurcated bars
  • Connection type for rail materials: screwed terminals
  • Mounting capability: 360°

Main electrical characteristics

  • Rated short-circuit breaking capacity Icn AC according to IEC 60898-1: 6 kA
  • Rated operating voltage Ue: 230 - 400 V
  • Power supply voltage type: AC
  • Rated insulation voltage Ui: 500 V
  • Rated impulse withstand voltage Uimp: 4,000 V
  • Frequency: 50 - 60 Hz

Connection

  • Input and output cross-section with screws, for solid conductors: 1 - 35 mm²
  • Input and output cross-section with screws, for flexible conductors: 1 - 25 mm²
  • Input cross-section with screws, for flexible conductors: 1 - 25 mm²
  • Input cross-section with screws, for solid conductors: 1 - 35 mm²
  • Flexible conductor cross-section: 1 - 25 mm²
  • Solid conductor cross-section: 1 - 35 mm²

Protection

  • Protection category (IP): IP20

Conditions of use

  • Pollution degree according to IEC 60664 / IEC 60947-2: 2
  • I²t3 energy limiting class
  • Moisture protection: suitable for all climates
  • Operating temperature: -25 - 70 °C

Power

  • Total power loss at rated current In: 7.80 W

Connectivity

  • Connection type: screwed terminals
  • Alignment of upper connection for rail materials: aligned terminals
  • Alignment of lower connection for rail materials: aligned terminals

Dimensions

  • Height: 83 mm
  • Width: 70 mm
  • Depth: 70 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
4
Rated Current
10 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

21,50 €
4,50 €   shipping cost
10€ coupon from the shop Sugarfree until 09/08!
10€ coupon from the shop Sugarfree until 09/08!
See more