The a/c Stop Leak identifies the leak point in the A/C system and permanently seals it, without any reaction to oxygen and moisture. It repairs leaks with a maximum size of 0.5mm.

• Includes application adapter P6081.
• For professional use only.

Before application, a preventive check is recommended to determine the size of the leak. Locate the low-pressure port of the a/c system and unscrew the cap. The compressor and the unit must be operating at maximum. Unscrew the cap of the cartridge and connect the adapter to the cartridge. If using the flexible adapter (P6082), bleed the air from the clear hose while the system is running. For vehicles without a low-pressure port, the special adapter P6083 must be used. Connect the adapter to the low-pressure port of the a/c system and dispense the entire content of the cartridge. Disconnect the cartridge from the a/c system. If necessary, repeat the process. Operate the a/c system for at least 30 minutes.