Skroutz.cy

Emtop Impact Demolition Hammer Electric 800W with Chuck SDS Plus ERHRL801
Rotary Hammers

Emtop Impact Demolition Hammer Electric 800W with Chuck SDS Plus ERHRL801

Introducing the EMTOP rotary hammer drill – the ultimate drilling companion!

  • Voltage and Power: 220-240V~50/60Hz, input power 800W
  • No-load Speed: 0-1100rpm
  • Impact Rate: 0-4000bpm, Impact Energy 2.5J
    • ...

Introducing the EMTOP rotary hammer drill – the ultimate drilling companion!

  • Voltage and Power: 220-240V~50/60Hz, input power 800W
  • No-load Speed: 0-1100rpm
  • Impact Rate: 0-4000bpm, Impact Energy 2.5J
  • Max. Drilling Capacity: Concrete 26mm, Steel 13mm, Wood 30mm
  • Chuck System: SDS Plus
  • Included Accessories: 3 drill bits and 2 chisels

Specially designed to...

See full description See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    2.5

    For casual amateur use, 2 to 4 Joules are considered sufficient.

  • Power

    Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

    2. Impact Energy is another characteristic that shows the "power" of the tool.

    800

    Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.
  • See all
73 00 €
Delivery Wed, 08 Jul - Fri, 10 Jul
8,00 € to a Skroutz Point or 9,00 € to an address
Delivery Thu, 16 Jul - Mon, 20 Jul
7,50 € to a Skroutz Point or 8,50 € to an address
Do you want it with 3,00 € shipping to Skroutz Point?
Sent from Greece
From Agrodev
Greece
1 piece
See Power Tools on the page of Agrodev
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Introducing the EMTOP rotary hammer drill – the ultimate drilling companion!

  • Voltage and Power: 220-240V~50/60Hz, input power 800W
  • No-load Speed: 0-1100rpm
  • Impact Rate: 0-4000bpm, Impact Energy 2.5J
  • Max. Drilling Capacity: Concrete 26mm, Steel 13mm, Wood 30mm
  • Chuck System: SDS Plus
  • Included Accessories: 3 drill bits and 2 chisels

Specially designed to tackle tough drilling applications in various materials, with powerful motors and high impact rate.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
800 W

Power: 800

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

Drilling Features

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
30 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
26 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
1100 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
2.5 Joule

Impact Energy: 2.5

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4000 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
No
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Hard Case
Handle included
Yes
Integrated Light
No
Guide
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

3 users have this product and can help you

Ask for the product

Description & Specifications

Introducing the EMTOP rotary hammer drill – the ultimate drilling companion!

  • Voltage and Power: 220-240V~50/60Hz, input power 800W
  • No-load Speed: 0-1100rpm
  • Impact Rate: 0-4000bpm, Impact Energy 2.5J
  • Max. Drilling Capacity: Concrete 26mm, Steel 13mm, Wood 30mm
  • Chuck System: SDS Plus
  • Included Accessories: 3 drill bits and 2 chisels

Specially designed to tackle tough drilling applications in various materials, with powerful motors and high impact rate.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
800 W

Power: 800

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

Drilling Features

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
30 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
26 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
1100 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
2.5 Joule

Impact Energy: 2.5

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4000 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
No
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Hard Case
Handle included
Yes
Integrated Light
No
Guide
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

73,00 €
8,00 € to a Skroutz Point
or   9,00 €   shipping cost