Skroutz.cy

JBL Studio 630 Passive Studio Monitor Speakers 6.5" 150W Pair Brown
Studio Monitor Speakers

JBL Studio 630 Passive Studio Monitor Speakers 6.5" 150W Pair Brown

Description JBL Studio 630

The new JBL Studio 6 sound system is everything a music lover hopes for. It features advanced PolyPlas caps, powerful speaker drivers, and an innovative high-definition...

Description JBL Studio 630

The new JBL Studio 6 sound system is everything a music lover hopes for. It features advanced PolyPlas caps, powerful speaker drivers, and an innovative high-definition waveguide using a high-frequency compression driver. The home listening experience will never be the same again.

General Specifications

  • 6.5" deep monophonic...
See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Description JBL Studio 630

The new JBL Studio 6 sound system is everything a music lover hopes for. It features advanced PolyPlas caps, powerful speaker drivers, and an innovative high-definition waveguide using a high-frequency compression driver. The home listening experience will never be the same again.

General Specifications

  • 6.5" deep monophonic speaker, 2-way compression driver
  • 6.5" (165mm) PolyPlas low-frequency speaker
  • High-definition waveguide (HDI) with 1” (25mm) high-frequency compression driver
  • Recommended Amplifier Capacity: Maximum 150W
  • Frequency Range: 45Hz – 40kHz
  • Sensitivity: 85dB @ 1M, 2.83V
  • Nominal Impedance: 6 Ohms
  • Crossover Frequencies: 1.9 kHz
  • Enclosure Type: Bass-Reflex via rear flame
  • Dimensions (W x D x H): 230 x 280 x 372mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Power (RMS)
150 W
Bass Driver
6.5 "

Bass Driver

The speaker that handles the low frequencies. It affects the depth, balance, and accuracy of the bass in the mix.
Max SPL
85 dB

Max SPL

The maximum sound level that the monitor can deliver without distortion, important for accurate listening at high volumes.
Driver Configuration
2 No of Drivers

Driver Configuration

The way the monitor divides frequencies among its speakers (e.g. 2-way or 3-way), for more accurate and clear reproduction.

2

The sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Tweeter Size
1 "
DSP
No

DSP

Digital signal processing that enhances the sound, automatically adjusts elements such as EQ, filters, or acoustic adaptation according to the space.

Main Specifications

Quantity
Pair
Type
Passive

Type

Active: It has a built-in amplifier, you just connect it and it works. It is the most common choice for studio monitors.

Passive: Requires an external amplifier to operate. It offers greater flexibility in setup, but needs additional equipment.
Colour
Brown

Dimensions

Height
37.2 cm
Width
23 cm
Length
25 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Description JBL Studio 630

The new JBL Studio 6 sound system is everything a music lover hopes for. It features advanced PolyPlas caps, powerful speaker drivers, and an innovative high-definition waveguide using a high-frequency compression driver. The home listening experience will never be the same again.

General Specifications

  • 6.5" deep monophonic speaker, 2-way compression driver
  • 6.5" (165mm) PolyPlas low-frequency speaker
  • High-definition waveguide (HDI) with 1” (25mm) high-frequency compression driver
  • Recommended Amplifier Capacity: Maximum 150W
  • Frequency Range: 45Hz – 40kHz
  • Sensitivity: 85dB @ 1M, 2.83V
  • Nominal Impedance: 6 Ohms
  • Crossover Frequencies: 1.9 kHz
  • Enclosure Type: Bass-Reflex via rear flame
  • Dimensions (W x D x H): 230 x 280 x 372mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Power (RMS)
150 W
Bass Driver
6.5 "

Bass Driver

The speaker that handles the low frequencies. It affects the depth, balance, and accuracy of the bass in the mix.
Max SPL
85 dB

Max SPL

The maximum sound level that the monitor can deliver without distortion, important for accurate listening at high volumes.
Driver Configuration
2 No of Drivers

Driver Configuration

The way the monitor divides frequencies among its speakers (e.g. 2-way or 3-way), for more accurate and clear reproduction.

2

The sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Tweeter Size
1 "
DSP
No

DSP

Digital signal processing that enhances the sound, automatically adjusts elements such as EQ, filters, or acoustic adaptation according to the space.

Main Specifications

Quantity
Pair
Type
Passive

Type

Active: It has a built-in amplifier, you just connect it and it works. It is the most common choice for studio monitors.

Passive: Requires an external amplifier to operate. It offers greater flexibility in setup, but needs additional equipment.
Colour
Brown

Dimensions

Height
37.2 cm
Width
23 cm
Length
25 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.