APPLICATION

SURFACE PREPARATION

• To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold residues, or moisture.
• Prime the surface with the corresponding recommended primer of the product (Water velatura).
• Shake the product well and apply it to the surface.
• The product acquires all its mechanical strength after 20 - 30 days.

APPLICATION CONDITIONS

Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS

• Brush
• Roller
• Paint gun

During the work, keep the tools "wet" in the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of the washing liquids into the water table.

WARNING: Wear protective gloves / protective clothing / eye / face protection. In case of contact with eyes, rinse cautiously with plenty of water for several minutes. If contact lenses are present, remove them if easy to do. Continue rinsing.

• COVERAGE: 12-15m2 / Lt on suitably prepared surfaces
• DILUTION: 10 - 20% water
• DRYING TIME: 1 - 2 hours depending on application conditions