APPLICATION

SURFACE PREPARATION

• To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold or moisture residues.
• Prime the surface with the corresponding recommended primer of the product (Water-based Velatura).
• Shake the product well and apply to the surface.
• The product acquires all its mechanical resistance after 20 - 30 days.

APPLICATION CONDITIONS

Avoid applying the product at a temperature below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS

• Brush
• Roller
• Paint gun

During work, keep the tools “wet” inside the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not pour wash liquids into the water supply.

CAUTION: Wear protective gloves, protective clothing, personal protective equipment for eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.

YIELD: 12-15m2 / Lt on properly prepared surfaces

DILUTION: 10 - 20% water

DRYING TIME: 1 - 2 hours depending on the application conditions