Skroutz.cy

El Greco 500ml
Liquid Glass

El Greco 500ml

The 2-component Liquid Glass 2/1 is available in sets of 150mL, 200mL, 500mL, and one liter.

Mix two parts of Component A and one part of Component B only as needed, pouring the B component first and...

The 2-component Liquid Glass 2/1 is available in sets of 150mL, 200mL, 500mL, and one liter.

Mix two parts of Component A and one part of Component B only as needed, pouring the B component first and then the A component into a separate mixing container. After mixing, you have limited working time depending on the temperature, 1-2 hours.

Gentle stirring is...

See full description See full description

  • Item

    Two-Component Resin

    This is a material consisting of resin (base) and hardener. Solidification is achieved only through the chemical reaction that results from the precise mixing of these two liquids.

  • Transparent Result

    1

    Ensures that the resin remains perfectly transparent after drying, offering the so-called "Crystal Clear" effect that resembles the clarity of crystal. It is the ideal choice for projects that require high aesthetics, such as jewelry, object encapsulation, and decorative castings.
  • See all
Review the product
Product report

Description

Description

The 2-component Liquid Glass 2/1 is available in sets of 150mL, 200mL, 500mL, and one liter.

Mix two parts of Component A and one part of Component B only as needed, pouring the B component first and then the A component into a separate mixing container. After mixing, you have limited working time depending on the temperature, 1-2 hours.

Gentle stirring is recommended half to one hour after mixing to completely remove bubbles, as well as the use of warm air. Full curing occurs after 3 days. Humidity and temperature differences can worsen the curing time.

If we want maximum protection for our cast surface, such as preventing yellowing and scratches over time (especially for outdoor use), it is recommended to apply one-component liquid glass the day after mixing.

The result will be a very good surface with protection from solar radiation, scratch protection, and loss of clarity.

Additionally, a large amount of special glass beads (Swarovski) can be used in the mixture, significantly increasing durability without affecting the final result.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Two-Component Resin

Type

Two-Component Resin
This is a material consisting of resin (base) and hardener. Solidification is achieved only through the chemical reaction that results from the precise mixing of these two liquids.
UV Resistant
Yes

UV Resistant


It is enhanced with special filters (UV stabilizers) that prevent the material from "yellowing" when exposed to sunlight. It ensures that the result will remain crystal clear and transparent over time.
Transparent Result
Yes

Transparent Result


Ensures that the resin remains perfectly transparent after drying, offering the so-called "Crystal Clear" effect that resembles the clarity of crystal. It is the ideal choice for projects that require high aesthetics, such as jewelry, object encapsulation, and decorative castings.

Quantity

Capacity
500 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The 2-component Liquid Glass 2/1 is available in sets of 150mL, 200mL, 500mL, and one liter.

Mix two parts of Component A and one part of Component B only as needed, pouring the B component first and then the A component into a separate mixing container. After mixing, you have limited working time depending on the temperature, 1-2 hours.

Gentle stirring is recommended half to one hour after mixing to completely remove bubbles, as well as the use of warm air. Full curing occurs after 3 days. Humidity and temperature differences can worsen the curing time.

If we want maximum protection for our cast surface, such as preventing yellowing and scratches over time (especially for outdoor use), it is recommended to apply one-component liquid glass the day after mixing.

The result will be a very good surface with protection from solar radiation, scratch protection, and loss of clarity.

Additionally, a large amount of special glass beads (Swarovski) can be used in the mixture, significantly increasing durability without affecting the final result.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Two-Component Resin

Type

Two-Component Resin
This is a material consisting of resin (base) and hardener. Solidification is achieved only through the chemical reaction that results from the precise mixing of these two liquids.
UV Resistant
Yes

UV Resistant


It is enhanced with special filters (UV stabilizers) that prevent the material from "yellowing" when exposed to sunlight. It ensures that the result will remain crystal clear and transparent over time.
Transparent Result
Yes

Transparent Result


Ensures that the resin remains perfectly transparent after drying, offering the so-called "Crystal Clear" effect that resembles the clarity of crystal. It is the ideal choice for projects that require high aesthetics, such as jewelry, object encapsulation, and decorative castings.

Quantity

Capacity
500 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

21,00 €
5,00 €   shipping cost