The playback system is based on 110 mm drivers for mid and low frequencies and a 13 mm dome tweeter made of Mylar. The woofer cones are made from specially coated cellulose. This material choice reduces vibrations and minimizes the overall weight of the cone. The system has been measured and tuned with the Klippel laser system. The speaker delivers a frequency range from 42 Hz to 36000 Hz. The tweeter features a specially designed flange on the front panel. This configuration ensures linear dispersion. Sensitivity is measured at 89 dB under 2.8V/1M conditions.

The cabinet of the central speaker is made from solid low-resonance MDF. This material minimizes distortions during playback. The design incorporates a conical slope towards the rear of the construction. The weight is 2.8 kg, while the physical dimensions are 149 x 250 x 190 mm. Inside, there is a high-resolution crossover with an octave slope of up to 18 dB. The circuit features a phase correction system for proper frequency distribution to the drivers. The front side has a black diaphragm and a removable fabric grille.

The nominal RMS power of the speaker is rated at 60 Watts. The maximum power handling reaches 120 Watts, supporting high dynamic demands. The nominal impedance ranges between 4 Ohms and 8 Ohms. The recommended amplifier power for proper drive is from 20 Watts to 110 Watts. Connection is made via compact, gold-plated screw terminals on the rear panel. These terminals prevent oxidation and ensure minimal signal loss. The speaker is supported on metal spikes that prevent the transfer of vibrations to the mounting surfaces.