PGP FIBRATED FILLER is a ready-to-use, acrylic building putty reinforced with rock wool, for internal and external use. It is suitable for filling cracks and holes in masonry, ceilings, floors, and doors. Thanks to its special composition, it does not crack and holds and absorbs movements and vibrations without breaking. It is applied to all common building surfaces.

• Ready to use
• Reinforced with rock wool
• Works easily, fills, and smooths excellently
• Dries quickly and sands easily with sandpaper
• Shows minimal shrinkage without cracking
• Offers excellent stability once dry
• Creates a perfect non-absorbent surface ready to be sanded and painted
• Internal and external use
• Speed - cleanliness

• Patching imperfections in walls and ceilings of building surfaces before painting.
• Suitable for plaster, smooth cementitious surfaces, aerated concrete, drywall, cement board, etc.

• Surfaces must be dry and clean of dust, oils, and loose residues
• Large cracks or joints are recommended to be primed with water primer
• Applied with a spatula
• Press the material onto the surface at a thickness no greater than 5mm
• For larger fills from 0.5 – 2cm, use gauze or plastic mesh for reinforcement
• Allow each layer to dry before applying the next one (about 1 hour)
• Fill the opening leaving excess material to shape the final surface more easily with a wet spatula
• Once the surface is dry, it can be sanded with sandpaper
• The final surface can be primed and painted
• Close the lid immediately after application to maintain the moisture of the product
• It is recommended to test the suitability of the product

• It is not suitable for plastic and metal surfaces
• Should not be applied outdoors when rain is expected (at least 5 hours before rain)
• Should not be applied at (ambient and surface) temperatures below 5°C
• Not suitable for application in areas with permanent moisture

Performance: depending on application

Thinning: none

Application: with a spatula

Initial drying: 30 minutes at 20°C

Final drying: 1 - 2 hours at 20°C

External use

Internal use

Application temperature: 10°C - 35°C

Cleaning: with water