TECHNICAL CHARACTERISTICS:

• Specific weight: 1.05 ± 30 gr / lt at 25 °C
• Coverage: 5-6 m² / lt per coat (may vary depending on surface roughness, absorbency, and application method)
• Finish: matte antique
• pH: 6.2-7.5
• Vapor permeability
• Colors: White (can be tinted with GgF pigments, UV resistant)

DRYING:

• Surface: 60’ at 20°C
• Recoat: 2-4 hours at 20°C
• Thorough: 6 hours at 20°C
• Packaging: 1L – 2.5L and 5L

SUBSTRATE PREPARATION:

Old surface: Remove all loose old and flaking paint and clean. Then, apply a stabilizing primer according to the type of surface. Once the primer is completely dry, apply a coat of PRIMUS SABBIA. After 4-6 hours at 20°C, proceed to apply La Casa dei Sogni.

New surface: Clean (and if necessary, fill) the surface you want to paint. Once dry, sand the surface and apply a coat of suitable primer. When the primer is completely dry, apply a coat of PRIMUS SABBIA. After 4-6 hours at 20°C, proceed to apply La Casa dei Sogni.

APPLICATION:

LA CASA DEI SOGNI is ready to use. Prepare the shades with the pigments indicated in the sample collection, mix by hand – do not use a mechanical stirrer and proceed to apply. Take enough material with the Giorgio Graesan wool glove.

Start distributing the material on the wall surface with the classic palm movement. Keep the edge of the glove clean. If you want the finish to look more aged, lightly pass over the surface with a damp glove after 15-30 minutes.

If you desire a more uniform appearance, reapply the same product.

NOTES:

• The application temperature should be between +10 °C and +30 °C.
• Clean tools immediately after use with water and soap.
• Stored for at least 2 years in its unopened original packaging.