Skroutz.cy

Atlas Filtri Self-Cleaning Central Supply Water Filter System Hydra RSH , ½" Inlet/Outlet, with Replacement Filter Atlas Filtri RSH 50μm 50μm
Water Filtration Systems

Atlas Filtri Self-Cleaning Central Supply Water Filter System Hydra RSH , ½" Inlet/Outlet, with Replacement Filter Atlas Filtri RSH 50μm 50μm

Self-Cleaning Water Filter Hydra With Pleated Screen RSH 50μm Atlas Filtri

  • Maximum operating pressure: 8 bar (116 psi)
  • Minimum operating pressure: 1.8 bar (26 psi)
  • Maximum operating temperature: 45°C...

Self-Cleaning Water Filter Hydra With Pleated Screen RSH 50μm Atlas Filtri

  • Maximum operating pressure: 8 bar (116 psi)
  • Minimum operating pressure: 1.8 bar (26 psi)
  • Maximum operating temperature: 45°C (113°F)
  • Minimum operating temperature: 4°C (39.2°F)
  • Replacement plastic screen RSH: Filtration density: 50μm
  • Replacement time: Approximately 2 years
  • ...
See full description See full description
74 80 €
75 Coins 75 Coins
Delivery Wed, 02 Sep - Fri, 04 Sep
3,50 € to a Skroutz Point or 4,50 € to an address
Do you want it with Free shipping?
Sent from Greece
From ThermEnergy 4.3 (7)
4.3 (7 reviews)
Greece
See Water Filters & Cartridges on the page of ThermEnergy
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Self-Cleaning Water Filter Hydra With Pleated Screen RSH 50μm Atlas Filtri

  • Maximum operating pressure: 8 bar (116 psi)
  • Minimum operating pressure: 1.8 bar (26 psi)
  • Maximum operating temperature: 45°C (113°F)
  • Minimum operating temperature: 4°C (39.2°F)
  • Replacement plastic screen RSH: Filtration density: 50μm
  • Replacement time: Approximately 2 years
  • Maintenance: Rinse every 1-2 months
  • Removes: particles, sediments, and suspended matter (dirt, stones, mud, rust)
  • Made from non-toxic materials, suitable for drinking water:
    • Head: Reinforced polypropylene
    • Bowl: PET
    • Air release valve: Stainless steel
    • Sealing & valve gasket: EPDM
    • Inlet/outlet threads: Brass CW 617 N
    • Self-cleaning valve: Gold-plated brass CW 614 N
    • Drain & hose connection: Reinforced polypropylene
  • Replacement pleated polypropylene screen RSH: Filter: Polypropylene
  • Inner ring & caps: Polypropylene
  • Sealing gaskets: SEBS with antimicrobial technology
  • Installation Instructions:
    • It is recommended to use a pressure reducer before installing any filter.
    • During installation, use only Teflon tape where necessary.
    • When changing the replacement filter, clean the bowl gasket, wipe it dry, apply lubricant (lubrikit), and place it back.
    • When the gasket is worn out, it needs to be replaced.

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Colour
    Transparent
    Number of Filters
    Single
    Type
    Central Supply

    Type

    Central Supply
    The installation is done by a plumber. They filter water for the whole house.
    Material
    Plastic
    with Replacement Filter
    Yes

    with Replacement Filter


    Includes a replacement filter of corresponding compatibility with this device.
    with Faucet
    No
    Pipe Cross Section
    ½"

    Pipe Cross Section

    This concerns the size of the connection thread of the device with the supply. The pipe diameter (inlet-outlet) of the device must be the same as that of the water supply, in order for the installation to be done correctly.
    Self-Cleaning
    Yes

    Self-Cleaning


    This only applies to Central Supply filters. Water supply will not be interrupted during cleaning.
    with Manometer
    No

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications
    Questions

    Questions

    Do you have a question about the product?

    2 users have this product and can help you

    Ask for the product

    Description & Specifications

    Self-Cleaning Water Filter Hydra With Pleated Screen RSH 50μm Atlas Filtri

    • Maximum operating pressure: 8 bar (116 psi)
    • Minimum operating pressure: 1.8 bar (26 psi)
    • Maximum operating temperature: 45°C (113°F)
    • Minimum operating temperature: 4°C (39.2°F)
    • Replacement plastic screen RSH: Filtration density: 50μm
    • Replacement time: Approximately 2 years
    • Maintenance: Rinse every 1-2 months
    • Removes: particles, sediments, and suspended matter (dirt, stones, mud, rust)
    • Made from non-toxic materials, suitable for drinking water:
      • Head: Reinforced polypropylene
      • Bowl: PET
      • Air release valve: Stainless steel
      • Sealing & valve gasket: EPDM
      • Inlet/outlet threads: Brass CW 617 N
      • Self-cleaning valve: Gold-plated brass CW 614 N
      • Drain & hose connection: Reinforced polypropylene
    • Replacement pleated polypropylene screen RSH: Filter: Polypropylene
    • Inner ring & caps: Polypropylene
    • Sealing gaskets: SEBS with antimicrobial technology
  • Installation Instructions:
    • It is recommended to use a pressure reducer before installing any filter.
    • During installation, use only Teflon tape where necessary.
    • When changing the replacement filter, clean the bowl gasket, wipe it dry, apply lubricant (lubrikit), and place it back.
    • When the gasket is worn out, it needs to be replaced.

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    Colour
    Transparent
    Number of Filters
    Single
    Type
    Central Supply

    Type

    Central Supply
    The installation is done by a plumber. They filter water for the whole house.
    Material
    Plastic
    with Replacement Filter
    Yes

    with Replacement Filter


    Includes a replacement filter of corresponding compatibility with this device.
    with Faucet
    No
    Pipe Cross Section
    ½"

    Pipe Cross Section

    This concerns the size of the connection thread of the device with the supply. The pipe diameter (inlet-outlet) of the device must be the same as that of the water supply, in order for the installation to be done correctly.
    Self-Cleaning
    Yes

    Self-Cleaning


    This only applies to Central Supply filters. Water supply will not be interrupted during cleaning.
    with Manometer
    No

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    74,80 €
    3,50 € to a Skroutz Point