Skroutz.cy

Lowara DOC 3 Single-phase Pump Waste Water / Sewage 0.33hp W107540000
Submersible Water Pumps

Lowara DOC 3 Single-phase Pump Waste Water / Sewage 0.33hp W107540000

Key features:

  • Maximum submersion depth: 5m
  • Cable Length: 5m
  • Maximum liquid temperature: 40°C
  • Outlet: 1 1/4''
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all

User Manual

220 00 €
220 Coins 220 Coins
Delivery Tue, 28 Jul - Mon, 03 Aug
61,00 € shipping cost
Do you want it with 56,00 € shipping?
Sent from Greece
From Aravidis 4.9 (156)
4.9 (156 reviews)
Greece
See Water Pumps on the page of Aravidis
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

LOWARA drainage pump suitable for portable or permanent domestic use with clean or cloudy water without significant solid particles. It is made of stainless steel and Noryl to withstand wear. The cooling of the motor is achieved by the water passing internally through the pump, allowing it to operate without issues even when the water level is low.

Vortex Impeller (open type)

The semi-open type impeller rotates approximately 0.5mm above the suction cover and self-cleans from settled materials.

Sealing with LAB - LIP system

The electric motor is protected by three lip-type sealing rings (LIP Seals). A system of radial diffusers at the rear of the impeller ensures the removal of solids from the sealing area to protect the three rings. A double labyrinth (LAB) and a V-type washer on the shaft further ensure the reliability of the sealing system.

Details

  • Features a built-in float switch and 5 meters of H07RN-F type cable with a Schuko plug.
  • Total width: 155 mm.
  • Float switch activation level: approximately 310 mm from the base of the pump.
  • Float switch deactivation level: approximately 50 mm from the base of the pump.
  • Total width of the version with magnetic float switch: 210 mm.
  • Magnetic float switch activation level: approximately 170 mm from the base of the pump.
  • Magnetic float switch deactivation level: approximately 90 mm from the base of the pump.
  • Minimum sump dimensions: 400x400 mm.

Pump Features

  • Maximum flow rate (m³/h): 7.5
  • Maximum head (m): 6.9
  • Discharge/outlet port: 1'' 1/4
  • Impeller type: Open type (VORTEX)
  • Maximum submersion depth: 5 meters
  • Maximum liquid temperature: 40°C (with the pump partially submerged)

Motor Specifications

  • Power: 0.33 HP
  • Voltage: 220V
  • Current: 1.43 Amp
  • RPM: 2900
  • Insulation Class: B
  • Minimum Pumping Level: 20
  • Float Type: Magnetic Float
  • Passing Solid: 10
  • Cable Length: 5m
  • Outlet: 1 1/4''
  • Max Head: 6.9m
  • Flow Rate: 7500Lit / h

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
247.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    musketeer_peri

    reliable sewage pump and quiet!

    Translated from Greek ·
    Did you find this review helpful?
Questions

Questions

Do you have a question about the product?

3 users have this product and can help you

Ask for the product

Description & Specifications

LOWARA drainage pump suitable for portable or permanent domestic use with clean or cloudy water without significant solid particles. It is made of stainless steel and Noryl to withstand wear. The cooling of the motor is achieved by the water passing internally through the pump, allowing it to operate without issues even when the water level is low.

Vortex Impeller (open type)

The semi-open type impeller rotates approximately 0.5mm above the suction cover and self-cleans from settled materials.

Sealing with LAB - LIP system

The electric motor is protected by three lip-type sealing rings (LIP Seals). A system of radial diffusers at the rear of the impeller ensures the removal of solids from the sealing area to protect the three rings. A double labyrinth (LAB) and a V-type washer on the shaft further ensure the reliability of the sealing system.

Details

  • Features a built-in float switch and 5 meters of H07RN-F type cable with a Schuko plug.
  • Total width: 155 mm.
  • Float switch activation level: approximately 310 mm from the base of the pump.
  • Float switch deactivation level: approximately 50 mm from the base of the pump.
  • Total width of the version with magnetic float switch: 210 mm.
  • Magnetic float switch activation level: approximately 170 mm from the base of the pump.
  • Magnetic float switch deactivation level: approximately 90 mm from the base of the pump.
  • Minimum sump dimensions: 400x400 mm.

Pump Features

  • Maximum flow rate (m³/h): 7.5
  • Maximum head (m): 6.9
  • Discharge/outlet port: 1'' 1/4
  • Impeller type: Open type (VORTEX)
  • Maximum submersion depth: 5 meters
  • Maximum liquid temperature: 40°C (with the pump partially submerged)

Motor Specifications

  • Power: 0.33 HP
  • Voltage: 220V
  • Current: 1.43 Amp
  • RPM: 2900
  • Insulation Class: B
  • Minimum Pumping Level: 20
  • Float Type: Magnetic Float
  • Passing Solid: 10
  • Cable Length: 5m
  • Outlet: 1 1/4''
  • Max Head: 6.9m
  • Flow Rate: 7500Lit / h

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
247.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
5 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    musketeer_peri

    reliable sewage pump and quiet!

    Translated from Greek ·
    Did you find this review helpful?
220,00 €
61,00 € 66,00 €   shipping cost
10% επιστροφή σε έπιπλα κήπου & βεράντας
10% επιστροφή σε έπιπλα κήπου & βεράντας
Μην την χάσεις