Skroutz.cy

MikroTik RB912UAG-5HPnD-OUT Access Point Wi‑Fi 4 Single Band (5GHz) for Outdoor Placement
Access Points

MikroTik RB912UAG-5HPnD-OUT Access Point Wi‑Fi 4 Single Band (5GHz) for Outdoor Placement

The RB912 is an outdoor device that features:

  • Two RPSMA connectors for antennas.
  • Protective cover for cables against moisture.
  • Three additional slots for antenna connectors, for use of the miniPCIe...

The RB912 is an outdoor device that features:

  • Two RPSMA connectors for antennas.
  • Protective cover for cables against moisture.
  • Three additional slots for antenna connectors, for use of the miniPCIe slot.
  • Capability to create a dual band device.
  • Easy access to the interior of the case with one hand.
  • Protection from the elements.
  • USB, Ethernet, and Grounding...
See full description See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Single Band (5GHz)

    An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.

  • Wi-Fi Generation

    Wi‑Fi 4

    Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

    For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
  • See all
95 79 €
96 Coins 96 Coins
Delivery Mon, 10 Aug - Wed, 12 Aug
3,50 € to a Skroutz Point or 4,50 € to an address
Do you want it with Free shipping?
Sent from Greece
From ΝΕTCORE
Greece
5 pieces
See Networking on the page of ΝΕTCORE
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The RB912 is an outdoor device that features:

  • Two RPSMA connectors for antennas.
  • Protective cover for cables against moisture.
  • Three additional slots for antenna connectors, for use of the miniPCIe slot.
  • Capability to create a dual band device.
  • Easy access to the interior of the case with one hand.
  • Protection from the elements.
  • USB, Ethernet, and Grounding wire outputs in a protective door.
  • Mounting loop for installation on a pole or mast.
  • Separate DIN rail mount.

The package includes: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

2 users have this product and can help you

Ask for the product

Description & Specifications

The RB912 is an outdoor device that features:

  • Two RPSMA connectors for antennas.
  • Protective cover for cables against moisture.
  • Three additional slots for antenna connectors, for use of the miniPCIe slot.
  • Capability to create a dual band device.
  • Easy access to the interior of the case with one hand.
  • Protection from the elements.
  • USB, Ethernet, and Grounding wire outputs in a protective door.
  • Mounting loop for installation on a pole or mast.
  • Separate DIN rail mount.

The package includes: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

95,79 €
3,50 € to a Skroutz Point