Features & Settings

Mode

Battery

Mode

Battery

"It is ideal for situations where there is no access to a power outlet." 2. "They also have a 9v transformer and can be connected to electrodes that have a voltage of 9v."

Stops

1

Stops

The maximum number of electric vans that can be used. For example, if I want to connect 4 electric vans to the programmer, then a programmer with at least 4 stops will be needed.

Expandable

No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.

Rain Sensor Connection

Yes

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.

Permanent Memory

No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve

No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.

Protection & Performance

Protection Certification

IP68

Protection Certification

IP68

The IP68 rating indicates full protection against dust, water, and pressure from permanent immersion in water.

Watering Settings

Time Delay

No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.

Manual Watering

No

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.

Weekly Scheduling

-

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.

Hourly Programming

-

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.

Cyclic Programming

-

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)