Key Features
- TYPE: MPPT solar charge controller
- Input Voltage: 12V @ 25V-65V / 24V @ 32V-95V
- Output Voltage: 12V or 24V - automatic detection
- Battery Charging Current: 20 A
- Maximum Power Point Tracking (MPPT)
- Automatic detection of 12/24V voltage
- Voltage and current adjustment
- PWM charging
- Multi-stage charging technology
- Disconnecting receivers
- Automatic activation after disconnection
- LCD display of operating parameters
- Safety system with protection against:
- Battery overcharging
- Deep battery discharge
- Reverse polarity on any input/output
- Automatic electronic fuse
- Short circuit
- Overvoltage at the panel input
- Overvoltage Uoc when the battery is not connected
- Reverse current to the panel at night
- Overheating and overload
- Disconnection of the battery when the voltage is too high
- MPPT-20 solar controller
- User manual in Polish
- Technical specifications:
- Output - input voltage: 12V @ 20V-60V / 24V @ 30V-90V (automatic detection)
- Supported battery type: AGM / Gel
- Charging Voltage (adjustable): 14.0V ÷ 15.0V / 28.0V ÷ 30.0V
- Holding Voltage: 13.8V / 27.6V
- Disconnection Voltage (LVD): 10.4V ÷ 11.4V / 20.8V ÷ 22.8V
- Reconnect Voltage: 12.2V ÷ 13.2V / 24.4V ÷ 26.4V
- Battery overvoltage protection: 12V @ 17V / 24V @ 34V
- Overvoltage protection for PV: 12V @ 60V / 24V @ 90V
- Maximum charging current: 20A
- Maximum load current: 20A
- Self-consumption:
- Maximum wire cross-section: 16mm / 6AWG
- Protection rating (IP): IP21
- Dimensions LxWxH [mm]: 175x175x95
- Weight [kg]: 1.47
- Type
- MPPT
- Maximum Voltage
- 24 V
- Maximum Short Circuit Current
- 20 A
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.