The Oase AquaActiv AlGo Direct water treatment works locally against algae through direct contact. It contains no added organic biocides or heavy metals, such as copper or sulfates.
Before use, remove as much algae as possible by hand. Apply preferably in the morning, directly to the algae, and leave it to work for at least 2–3 hours. If the algae layer is dense, another application may be needed after 36 hours. The residues are broken down biologically by the microorganisms contained in the product and do not need to be removed with a net. Do not use when the pH is above 8.5 and the carbonate hardness is below 3 °dH, or in marsh areas or on aquatic plants.
- Capacity: 5000 ml
- Use: Algae control through direct contact
- Dosage: 50 to 100 ml per m² of treated surface, as required
- Action time: At least 2–3 hours
- Repeat application: After 36 hours, if needed
- Composition: No added organic biocides or heavy metals, such as copper or sulfates
- Environmentally friendly: Yes
Dimensions
- Capacity
- 5000 ml
Usage
- Ph/Kh Setting
- No
- Water Purification
- No
- Vitamin Supplement
- No
- Water Conditioner
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.