The Teletek MAG8P fire alarm panel is a standalone unit that supports up to 256 detectors and an unlimited number of manual call points. The double-knock function allows a detector to be activated twice within a specified time, while the two outputs support up to 8 sirens. It features an automatic diagnostic system with LED indicators and a siren activation delay of 1 to 10 min.

The panel supports a relay expansion card and an event card, while the EOL end-of-line resistor enables continuous monitoring of the inputs. Access levels are protected by a key on the front panel. It can be connected to a communicator to send signals to a monitoring centre and provide Fault and Fire notifications, as well as enable remote operation via an app. It is certified to European standards EN54-2/4 and requires no programming.

• Type: Standalone fire alarm panel
• Zones: 8
• Maximum number of detectors: 256
• Manual call points: Unlimited
• Sirens outputs: 2
• Maximum number of sirens: 8
• Siren activation delay: 1–10 min
• Power supply: 230 VAC ± 10%, 0.63 A fuse
• Battery: 12 V / 7 Ah
• Maximum current with fully charged battery: 0.7 A
• Minimum standby current: 0.125 A
• Maximum power supply current in standby: 4.5 A
• Auxiliary output: 24 VDC / 0.3 A
• Operating temperature: -5 °C to +40 °C
• Weight without battery: 2.4 kg
• Dimensions: 340 × 290 × 100 mm
• Certification: EN54-2/4