Skroutz.cy

EnGenius ECW230S WiFi Mesh Network Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)
Access Points

EnGenius ECW230S WiFi Mesh Network Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)

ECW230S Wi-Fi 6 (802.11ax) is an indoor wireless access point with 4x4 MIMO, cloud-managed, featuring WIPS and Zero DFS radio interfaces for spectrum and channel usage monitoring, as well as DFS...

ECW230S Wi-Fi 6 (802.11ax) is an indoor wireless access point with 4x4 MIMO, cloud-managed, featuring WIPS and Zero DFS radio interfaces for spectrum and channel usage monitoring, as well as DFS signal detection via Zero DFS radios.

  • Dual simultaneous Wi-Fi 6 802.11ax architecture and backward compatibility.
  • Speeds of up to 2,400 Mbps (5 GHz) and up to 1,200...
See full description See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all
530 00 €
530 Coins 530 Coins
Delivery Fri, 10 Jul - Tue, 14 Jul
Free shipping cost
Sent from Greece
From Bst Systems
Greece
10 pieces
See Networking on the page of Bst Systems
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

ECW230S Wi-Fi 6 (802.11ax) is an indoor wireless access point with 4x4 MIMO, cloud-managed, featuring WIPS and Zero DFS radio interfaces for spectrum and channel usage monitoring, as well as DFS signal detection via Zero DFS radios.

  • Dual simultaneous Wi-Fi 6 802.11ax architecture and backward compatibility.
  • Speeds of up to 2,400 Mbps (5 GHz) and up to 1,200 Mbps (2.4 GHz).
  • 2.5 GbE connection achieving higher throughput and supporting 802.3at & 48V PoE input for flexible installation over 100 meters.
  • Wireless network security recognition and protection via WIDS/WIPS radio.
  • BLE client list through beacon scanning.
  • Supports WPA3 and WPA2-AES authentication.
  • Cloud-managed with AP & Mesh functionality.
  • Fast device onboarding and configuration, remote monitoring, and troubleshooting.
  • Manage an unlimited number of APs remotely through the EnGenius Cloud app.
  • Mesh Wireless support for simplified deployment, signal optimization, and automatic repair.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
3600 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE+
MIMO Technology
4x4

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

4x4
Use of four antennas for maximum performance, better stability, and high speeds in environments with many devices.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

ECW230S Wi-Fi 6 (802.11ax) is an indoor wireless access point with 4x4 MIMO, cloud-managed, featuring WIPS and Zero DFS radio interfaces for spectrum and channel usage monitoring, as well as DFS signal detection via Zero DFS radios.

  • Dual simultaneous Wi-Fi 6 802.11ax architecture and backward compatibility.
  • Speeds of up to 2,400 Mbps (5 GHz) and up to 1,200 Mbps (2.4 GHz).
  • 2.5 GbE connection achieving higher throughput and supporting 802.3at & 48V PoE input for flexible installation over 100 meters.
  • Wireless network security recognition and protection via WIDS/WIPS radio.
  • BLE client list through beacon scanning.
  • Supports WPA3 and WPA2-AES authentication.
  • Cloud-managed with AP & Mesh functionality.
  • Fast device onboarding and configuration, remote monitoring, and troubleshooting.
  • Manage an unlimited number of APs remotely through the EnGenius Cloud app.
  • Mesh Wireless support for simplified deployment, signal optimization, and automatic repair.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
3600 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE+
MIMO Technology
4x4

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

4x4
Use of four antennas for maximum performance, better stability, and high speeds in environments with many devices.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

530,00 €
Free   shipping cost