Einza Aqua Tiefgrund primer penetrates the pores of absorbent building surfaces, stabilises the surface and reduces its absorbency before painting or applying coatings. It improves the adhesion of subsequent coats and helps ensure even paint absorption.
Suitable for interior and exterior use on masonry, plaster, cement screeds, concrete, lime plaster and plasterboard. Its concentrated formula is diluted with water according to the absorbency of the surface.
- Type: Deep-penetrating primer
- Properties: Eco-friendly, water-soluble, concentrated
- Surface material: Masonry
- Suitable surfaces: Absorbent building substrates, plaster, cement screeds, concrete, lime plaster and plasterboard
- Areas of use: Interior and exterior
- Colour: Transparent
- Coverage: Approximately 6–10 m²/L per coat, depending on the absorbency of the substrate
- Dilution: Up to approximately 1:4 with water, depending on the absorbency of the surface
- Application method: Brush, roller or airless spray gun
- Touch-dry: Approximately 1 hour at 23 °C
- Fully dry: Approximately 6 hours at 23 °C
- Recoating: After approximately 6 hours
- Tool cleaning: With water immediately after use
- Volume: 1 L
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Ecological
Quantity
- Mass Gaining
- 1 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.