The einzA Aqua All-Grund primer is a water-based adhesion and anti-corrosion primer for iron, steel and other difficult surfaces. It is suitable for interior and exterior use and can also be applied to galvanized steel, zinc, light and non-ferrous metals, rigid PVC, thermosetting plastics and wood. It has low odour, good filling properties and dries quickly.
- Properties: Water-based
- Type: Adhesion and anti-corrosion primer
- Use: Interior and exterior
- Suitable surfaces: Iron, steel, zinc, galvanized steel, light and non-ferrous metals, rigid PVC, thermosetting plastics, wood and wood products
- Colour: White
- Coverage: 10–12 m²/L per coat or 85–100 ml/m²
- Drying time: Touch-dry in approximately 2 hours at 20°C and 65–75% relative humidity
- Recoating: After approximately 3 hours with water-based einzA products, or 24 hours with conventional solvent-based einzA alkyd or synthetic resin products
- Application: With a synthetic-bristle acrylic brush, foam roller, conventional spray gun or airless spray gun
- Thinning: With water
- Tool cleaning: With water immediately after use
- Temperature resistance: Up to 120°C under dry conditions
- Volume: 0.75 L
Specifications
- Genre
- Pool Ground Pad
- Surfaces
- Internal
- Properties
- Water
Quantity
- Mass Gaining
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.