Syntilor 2 in 1 woodstain varnish, formulated with polyurethane resins, penetrates deep into the wood and protects it from the elements. Apply with a brush; do not dilute. It dries quickly and naturally. Suitable for all types of wood and for indoor or outdoor use on vertical wooden structures such as garden sheds, chalets, shutters, gates and fences.
Before application, the wood must be sound, clean and dry, free of damaged old coatings or other resins, and sanded with 80-grit sandpaper. For old or previously stained wood in good condition, one coat is sufficient; two coats are needed if it is in poor condition. Apply three coats to new, bare wood outdoors or two coats indoors. Lightly sanding between coats helps reduce roughness in the wood. Do not apply to decks or wooden floors.
- Type: Woodstain varnish
- Composition: Polyurethane resins
- Application surface: Wood
- Colour: Clear
- Finish: Gloss
- Use: Indoor and outdoor
- Application: Brush on, undiluted
- Touch-dry time: 2 hours
- Drying time between coats: 4 hours
- Full drying time: 12 hours
- Coverage: 12 m² per litre per coat
- Quantity: 750 ml
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Gloss
- Insecticide / Antifungal
- No
- Polyurethane
- Yes
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.