Chrotech Ultraxyl Aqua water-based wood stain protects and decorates wooden structures indoors and outdoors, such as doors, frames, and windows. It is water-soluble and acrylic-based, with an ebony shade and a satin finish. It enhances the natural appearance of wood and provides scratch resistance, while being virtually odorless during application.
Apply 2–3 coats using a brush, felt roller, or spray gun. Dilute the first coat with water by up to 10% by volume; apply subsequent coats undiluted. It dries in approximately 50 minutes and can be recoated after approximately 3.5 hours. Coverage is approximately 9.5 m²/L per coat and depends on the type and absorbency of the wood.
- Quantity: 750 ml
- Application surface: Wood
- Shade: Ebony
- Finish: Satin
- Base: Acrylic
- Dilution: Water, up to 10% by volume for the first coat
- Application methods: Brush, felt roller, spray gun
- Coats: 2–3
- Drying time: Approximately 50 minutes
- Recoating time: Approximately 3.5 hours
- Coverage: Approximately 9.5 m²/L per coat
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Satin
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Ebony
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.