Chrotech Ultraxyl Aqua wood stain protects and decorates wooden structures indoors and outdoors, such as doors, frames and windows. It is water-based, acrylic-based and virtually odourless during application. It enhances the natural appearance of the wood and offers scratch resistance.
Apply with a brush, felt roller or spray gun in 2–3 coats, lightly sanding and removing dust between coats. Dilute with water by up to 10% by volume for the first coat only; apply subsequent coats undiluted. The surface dries in 50 ± 10 minutes. Recoat after 3.5 ± 0.5 hours, and apply the third coat after 10 hours. Clean tools immediately with plenty of water and soapy water.
- Type: Wood stain
- Base: Acrylic
- Thinner: Water
- Colour: Chestnut
- Finish: Gloss
- Quantity: 750 ml
- Drying time: 50 ± 10 minutes
- Recoating time: 3.5 ± 0.5 hours
- Coverage: 9.5 ± 1.5 m²/L per coat, depending on the type and absorbency of the wood
- Application: Brush, felt roller or spray gun
- Surface preparation: Sand and remove dust, oils, waxes and loose material
- First-coat dilution: Up to 10% by volume
- Spray gun nozzle opening: 1.6–1.8 mm
- Air pressure: 1–2 bar
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Gloss
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Chestnut
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.