Chrotech Ultraxyl Aqua wood stain protects and decorates wooden structures indoors and outdoors, such as doors, frames and windows. It is water-based, acrylic and virtually odourless during application. It enhances the wood’s natural appearance and provides scratch resistance.
Apply with a brush, felt roller or spray gun in 2–3 coats. Dilute with water by up to 10% by volume for the first coat only; apply subsequent coats undiluted. Lightly sand the surface and remove dust between coats. It dries in 50±10 minutes. Recoat after 3.5±0.5 hours, and apply the third coat after 10 hours. Clean tools immediately after use with water and soapy water.
- Type: Wood stain
- Suitable surface: Wood
- Colour: Oregon
- Gloss level: Gloss
- Base: Acrylic
- Dilution: Water, up to 10% by volume for the first coat only
- Coats: 2–3
- Application method: Brush, felt roller or spray gun
- Drying time: 50±10 minutes
- Recoating time: 3.5±0.5 hours
- Third-coat application time: After 10 hours
- Coverage: 9.5±1.5 m²/L per coat, depending on the type and absorbency of the wood
- Quantity: 0.75 L
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Gloss
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Oregon
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.